V-COIL rapid Bộ sửa ren, 12 x 1,25 - 1,5D

• Repairs damaged or worn ren trong (M12 x 1.25)
• Reinforces weak materials with low shear strength
• Restores rejected or worn parts
• 1/4” hex drive for manual or power tool use
• Corrosion- and heat-resistant stainless thép inserts
• Compact, quick, and no manual alignment required

• 1 × V-COIL rapid STI Mũi khoan xoắn 12.3 mm – VÖLKEL 03472
• 1 × V-COIL rapid STI tap, Form D, HSS-G, M12 × 1.25 – 03401
• 1 × Dụng cụ bẻ chân ren cấy số 15 – VÖLKEL 07097
• 6 × Ren cấy V-COIL Type S, free running M12 × 1.25 – 1.5D – 07323
• 1 × V-COIL rapid installation tool M12 × 1.25 – 08191

1. 1. Prepare: Drill out the damaged thread, deburr edges, and clean the bore thoroughly.
2. 2. Cut the STI thread: Use the included STI tap to create the new receiving thread.
3. 3. Insert the coil: Screw in the wire insert with the Rapid tool and align flush with the surface.
4. 4. Remove tang: Break off the driving tang carefully using the Dụng cụ bẻ chân ren cấy.
5. 5. Check fit: Verify the thread using a screw or gauge.

What is this kit suitable for?
For fast repair and reinforcement of damaged M12 × 1.25 ren trong in low-strength materials.

What does 1.5D mean?
The insert length equals 1.5 times the nominal diameter – the standard for most applications.

Can I use this kit with a cordless screwdriver?
Yes, all tools have a 1/4” hex drive for hand or cordless use.

Are replacement inserts available?
Yes, V-COIL inserts are available separately in various lengths.

Do I need alignment?
No, the Rapid system requires no manual adjustment.