Tap Holder with Ratchet for right- and left-hand-turn No. 1 (10 pieces)

• Drive taps in confined working areas where full rotation is not possible
• Use the tool holder for securely clamping and guiding taps
• Control changes of direction precisely via the ratchet function
• Machine internal threads in assembly, maintenance, and repair situations
• Process: manual or assisted drive depending on your tool holder and machine configuration
• Use: thread cutting, reworking threads, and cleaning threads depending on the condition of the thread

Note Make sure that the tap is correctly clamped and that the tool is always guided in alignment with the hole.

• Ratchet mechanism enables work in limited swing spaces
• Switchable between right- and left-hand operation for controlled movement sequences
• Makes it easier to start and guide the tap
• Suitable for maintenance, assembly, and servicing work
• Supports even power transmission during manual thread cutting

• Only suitable to a limited extent for applications with very high torque requirements
• Manual handling requires experience for consistent thread quality

1. Clean the tool holder and the tap and check the holder for a proper fit. This ensures that no contamination impairs the clamping.
2. Insert the tap into the holder and clamp it evenly until it is secure and free of play. Stable clamping is crucial for guidance.
3. Set the desired rotation direction on the ratchet and check the function before starting. This helps avoid incorrect movements during the workflow.
4. Align the tool holder exactly with the hole axis and begin with short, even movements. Keep the alignment constant to achieve clean thread geometry.
5. If necessary, switch the rotation direction, retract the tap in a controlled manner, and then remove it. Clean the tool and holder after use.

• 10 pieces Tool Holder with Ratchet for Right- and Left-Hand Operation No. 1

• Design: Ratchet tool holder
• Application range: Holding and operating taps
• Function: Ratchet with switchable right- and left-hand operation
• Version: No. 1
• Use: Operating and holding tool for internal threads

When is a tool holder with ratchet useful?
It is useful when you work in areas with restricted movement space and continuous rotary movement is not possible.

How do you set the correct rotation direction?
The rotation direction is set via the ratchet switching function and should be checked before starting work.

What is this tool holder used for?
It is used as a holder and drive tool for taps when cutting, reworking, or cleaning internal threads.

What does the designation No. 1 mean?
This designation identifies the version within the product range and serves for clear classification.

What should you pay attention to during use?
Clean alignment with the hole axis and stable clamping of the tap are crucial for a clean result.

Is the tool holder suitable for all taps?
Its use depends on the appropriate holder size and version. The holder must match the geometry of the tap being used.

Where can you find more information about threading tools?
VD 23 catalog as PDF