Hand Tap set of 2 pieces DIN 2181 HSS-G - M 54 x 2.0

Name: Hand Tap set of 2 pieces DIN 2181 HSS-G - M 54 x 2.0
Brand: VOLKEL
SKU: 28002
Price: 14421000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Hand Tap set of 2 pieces DIN 2181 HSS-G - M 54 x 2.0 by VÖLKEL, item no. 28002, suitable for cutting internal threads.

SKU: 28002

14.421.000 đ

Price includes VAT

Description

Hand Tap set of 2 pieces DIN 2181 HSS-G - M 54 x 2.0

This hand tap set is intended for producing internal threads during assembly, repair, and general metalworking in the designation M 54 x 2.0. The set format supports a controlled approach where you follow the intended tool order for the set execution.

Thread quality depends on correct hole preparation, alignment in the first turns, and lubrication matched to the workpiece material. If you encounter heavy cutting load or poor chip evacuation, stop and correct the setup rather than forcing the tool.

Application

Cut internal threads in prepared holes for fasteners and fittings depending on execution
Restore worn internal threads during maintenance and overhaul tasks
Use in mechanical engineering, assembly, and service operations where thread fit is function critical
Hold the square drive in a suitable tap wrench and keep the tool aligned to the bore axis
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition

Note Select the variant that matches the thread standard, hand direction, and tolerance requirements stated in your drawing.

Benefits

Produces internal threads suitable for mechanical fastening and sealing applications depending on thread form
Set format supports a staged approach when the execution uses more than one tap
Standard based geometry supports interchangeability when the matching standard is used
Tool steel grade supports stable cutting edges for typical workshop materials depending on execution

Drawbacks

Limited performance in very hard, abrasive, or heat treated materials depending on tool grade and coating
Not suitable for high volume production where cycle time and tool life must be maximized

Step by step

Confirm the thread specification in the product name and match it to the drawing requirement
Prepare the hole according to your drilling and chamfering process specification
Select the correct tap from the set according to the execution and tool markings
Align the tap square to the hole axis before you start the first turns
Apply a lubricant suited to the workpiece material and tap type
Drive the tap with steady control and clear chips regularly to reduce cutting load
Continue until the required thread depth is reached according to your process plan
Reverse the tool out, remove chips from the thread, and clean the tap before storage

Scope of supply

2 pieces: Hand taps as supplied in the set execution

Technical features

Tool type: Hand tap set
Standard: DIN 2181 HSS-G - M 54
Material: HSS-G
Thread system: Metric
Manufacturing: Ground flutes (G)
Tolerance: ISO 2 (6H)
Thread designation: M 54 x 2.0

Frequently asked questions (FAQ)

What is the practical benefit of a hand tap set? A set can support a staged approach where you start the thread and then finish it with a second tool depending on the set execution. This can help you control cutting load and thread quality in manual work. How do you prepare the hole before tapping? Follow your drawing and process plan for drilling and chamfering. Correct preparation supports alignment and helps the tap enter without damaging the first threads. Which lubricant should you use? Choose lubricant based on workpiece material and the tap type. In many workshop cases, cutting oil supports thread quality, while emulsions may be used when your process requires it. What reduces the risk of tap breakage? Keep the tap square in the start, drive it with steady control, and clear chips often enough that cutting load stays stable. Stop if resistance rises sharply and correct the setup before continuing. How do you check the finished thread? Use a suitable gauge, a mating screw, or the inspection method defined in your quality plan. If fit is tight, check hole preparation, alignment, and tool condition before reworking. Where can you find additional technical information for this tool type? Use the technical information document for background on geometry terms, selection logic, and handling notes. Technical information hand taps as PDF What is a sensible inspection method after cutting? Use the inspection method defined in your quality plan and check fit and surface. If you see tearing or tight fit, review alignment, lubrication, and tool condition. Where can you find the full VÖLKEL catalog for selection support? Use the catalog for the complete range, execution variants, and reference tables. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric-fine ISO-thread
Standard	DIN 2181
Material	HSS-G
Tolerance	ISO2 (6H)
Size	M 54 x 2.0
Overall length (L1)	140 mm
Thread length (L2)	36 mm
Core hole diameter (D1)	52.0 mm
Shank diameter (D2)	40.0 mm
Drive connector	32.0 mm
EAN	4022835280026
Item number	28002
Type of flute	straight fluted
Application	for through and blind holes
Thread standard	DIN 13

Optional Accessories

SKU	Image	Price VNĐ	Product name & short description
28002-1		7.210.000	Hand Tap Rougher DIN 2181 HSS-G - M 54 x 2.0 Hand Tap Rougher DIN 2181 HSS-G - M 54 x 2.0 by VÖLKEL, item no. 28002-1, suitable for cutting internal threads.
28002-2		7.210.000	Hand Tap Finisher DIN 2181 HSS-G - M 54 x 2.0 Hand Tap Finisher DIN 2181 HSS-G - M 54 x 2.0 by VÖLKEL, item no. 28002-2, suitable for cutting internal threads.