Round Die DIN 223 (DIN EN 22568) HSS - M 11 x 1.5

Name: Round Die DIN 223 (DIN EN 22568) HSS - M 11 x 1.5
Brand: VOELKEL
SKU: 27448
Price: 540000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Round Die DIN 223 (DIN EN 22568) HSS - M 11 x 1.5 by VÖLKEL, item no. 27448, suitable for cutting external threads.

SKU: 27448

€18.09

Stock status: Out of stock

Indicative price

Description

Round Die DIN 223 (DIN EN 22568) HSS - M 11 x 1.5

You restore or create external threads with a round die when machine access is limited. The result depends on correct preparation, alignment, and lubrication.

Match the die to your thread requirement and clamp it securely in a round die holder. Start square to the workpiece axis and use lubrication to reduce friction and wear.

Application

Cut external threads on rods, bolts, and studs in repair, prototyping, and small batch work.
Use with a round die holder or die stock to keep the die square to the workpiece axis.
Apply cutting fluid matched to your material to reduce friction and protect the thread profile.
Process: manual driving or assisted driving depending on your holder and machine setup.
Use: thread cutting, re tapping, and thread cleaning depending on condition.

Note Confirm thread system, pitch, and fit requirement before cutting. Prepare the workpiece with a clean lead in chamfer.

Benefits

Supports repeatable thread cutting in small batches with minimal setup.
Good access in confined work areas compared with larger machines.
Easy to clean and store as an individual tool.
Works well for service tasks when the correct preparation is in place.

Drawbacks

Performance is limited in very hard or abrasive materials unless a suitable die execution is selected.
Cycle time is limited for high volume production compared with dedicated machine processes.

Step by step

Inspect the workpiece and ensure there is a clean lead in chamfer at the thread start.
Select a round die holder and clamp the die securely before you approach the workpiece.
Apply cutting fluid to the workpiece area and to the die entry side.
Align the die square to the workpiece axis and start cutting with steady forward pressure.
Turn the die forward to advance the thread while maintaining alignment.
Reverse briefly at intervals to clear chips from the cutting edges.
Continue until the required thread length is reached and then stop the forward feed.
Back the die off the workpiece and remove it from the holder.
Clean the die and verify the thread fit with a matching part or a suitable gauge.

Scope of supply

1 piece: tool as specified by the product name

Technical features

Product type: Round die
Standard: DIN EN 22568; DIN 223
Thread designation: M 11 x 1.5
Thread system: Metric ISO
Tool material: HSS

Frequently asked questions (FAQ)

How do you select the correct die for your thread? Match the thread designation in the product name to your required external thread and ensure the mating nut or component uses the same system and pitch. Which holder should you use for a round die? Use a round die holder or die stock that clamps the die securely and supports square alignment to the workpiece axis. Which workpiece preparation is important before cutting an external thread? Prepare a clean lead in chamfer and ensure the workpiece surface is free of scale and burrs so the die can start square and cut cleanly. How do you manage chips during external thread cutting? Use suitable cutting fluid and clear chips regularly during the operation so chips do not score the new thread surface. Where can you find additional technical information on round dies? Use this PDF for background, setup notes, and general guidance: Technical information round dies as PDF How do you store and protect a round die after use? Clean the die, remove cutting residue, and apply a light corrosion protection film before storage in a dry container. Where can you find more VÖLKEL threading tool information for selection and application? Use this catalog for product range and selection help: VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric ISO-thread
Standard	DIN 223 (DIN EN 22568)
Form	solid version (Form B)
Material	HSS
Tolerance	6g
Size	M 11 x 1.5
Outer diameter	30.0 mm
EAN	4022835274483
Item number	27448
Thread standard	DIN 13
Rec. Bolt diameter	10.85 mm