Mũi taro máy JIS B-4430 Form C 35° Spiral Flute HSSE - NPS 3/4 x 14

• Cut ren trong in a machine setup where repeatability and controlled feed are required.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Use a suitable tapping chuck or rigid holder and keep axial alignment to reduce side load.
• Manage lubrication and chip evacuation to limit torque and improve thread surface quality.
• Spiral flute designs support chip evacuation out of lỗ bít when used with appropriate process parameters.

Lưu ý Use suitable cutting fluid and stop if torque rises unexpectedly, then inspect alignment and chip evacuation.

• Supports repeatable threading in machine assisted processes
• Designed for controlled feed and consistent thread quality
• Efficient for production workflows when a stable setup is available

• Tool performance depends on correct lubrication and chip evacuation in the hole
• Requires careful alignment to avoid damage to the first threads

1. Prepare the hole according to the specified thread standard and add an entry chamfer.
2. Clamp the workpiece rigidly and ensure the spindle axis is aligned to the hole.
3. Mount the tap in a suitable tapping chuck or rigid holder.
4. Apply a tapping Chất bôi trơn cắt gọt ren appropriate for the material and process.
5. Set a controlled feed that matches the thread pitch and start the cut.
6. Maintain lubrication and monitor chip evacuation from the flutes.
7. Retract the tap under control after reaching the required thread depth.
8. Clean the thread and verify the functional fit.

• 1 chiếc Mũi taro máy JIS B-4430 Form C 35° Spiral Flute HSSE - NPS 3/4 x 14

• Product type: Mũi taro máy
• Standard: JIS B-4430
• Tool material: HSSE
• Thread designation: NPS 3/4 x 14
• Thread system: NPS
• Chamfer form: Form C
• Flute design: Spiral flute