HexDrive Mũi taro máy Set, Form C 15° RSP, HSS-E, M 3–12

• Covering several related threading steps with one coordinated tool set
• Keeping thread production, reworking and handling tools together for workshop and service use
• Reducing selection errors between the individual tools used for drilling, tapping, external threading and handling
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Select the product by thread designation, workpiece condition and the holder concept used in your process.

• Thread related geometry and designation are clearly assigned in the product name for practical selection
• Suitable for workshop, maintenance and machine room workflows with repeatable tool use
• The explicit standard and material markings support controlled tool assignment in professional use
• A dedicated threading tool reduces compromise compared with improvised general purpose tooling

• Tool selection still depends on matching the thread system, material and process type to the actual job.
• It is intended for defined threading work and not for undirected high speed use without the correct setup and lubrication strategy.

1. Identify the required thread designation and choose the matching tool from the set.
2. Prepare the workpiece with the relevant drilling or entry step for the selected operation.
3. Mount the chosen tap, die or holder securely before the threading process starts.
4. Carry out the threading step with controlled alignment and suitable lubrication.
5. Change tools only after cleaning the work area and confirming the next operation.
6. Return each component to the set after cleaning so the kit stays complete and ready for reuse.

• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 3 (37670)
• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 4 (37671)
• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 5 (37672)
• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 6 (37673)
• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 8 (37674)
• 1 × Mũi taro máy HexDrive DIN 371 Form C 15° RSP HSS-E – M 10 (37675)
• 1 × Mũi taro máy HexDrive DIN 376 Form C 15° RSP HSS-E – M 12 (37676)
• 1 × each: Mũi khoan xoắn 2.5/3.3/4.2/5.0/6.8/8.5/10.2 mm

• Product type: HexDrive Mũi taro máy set
• Thread system: Metric ISO
• Standard: DIN 371, DIN 376
• Form: Form C 15° RSP
• Tool material or finish: HSS-E
• Drive or handling concept: HexDrive