Twist drill bits (set of 19 pcs.) 1.0 – 10.0 mm

• Drill general workshop holes and prepare many tapping jobs with a compact size assortment.
• Support maintenance, assembly, and small batch work where quick drill size access is important.
• Use for through holes and pilot operations where the workpiece and process allow the stated drill type.
• Keep the set ready for thread preparation tasks when the drawing specifies a drilled starting hole.

Note Match drill selection, speed, and coolant strategy to the workpiece material and the required hole quality.

• Broad drill range supports everyday workshop drilling from one compact set.
• Organized packaging keeps the sizes together and reduces search time.
• HSS-G drill specification supports accurate drilling in many general machining tasks.
• Useful for hole preparation before tapping and for general maintenance drilling.

• The set does not replace a production specific drill program for difficult materials or advanced hole tolerances.
• It is a practical workshop set, not a substitute for dedicated specialist drills in every advanced material.

1. Select the drill size from the set according to the required hole or tapping preparation.
2. Clamp the drill securely in the appropriate holder or machine spindle.
3. Mark and support the workpiece so the drill starts accurately and remains stable.
4. Drill with cutting conditions that suit the material and the required hole quality.
5. Withdraw the drill regularly to clear chips from the hole and maintain process control.
6. Clean the drill and return it to the set so the range stays complete and protected.

• 1x Drill bits, HSS-G, 1,0 VÖLKEL 67110
• 1x Drill bits, HSS-G, 1,5 VÖLKEL 67115
• 1x Drill bits, HSS-G, 2,0 VÖLKEL 67120
• 1x Drill bits, HSS-G, 2,5 (M3) VÖLKEL 67125
• 1x Drill bits, HSS-G, 3,0 VÖLKEL 67130
• 1x Drill bits, HSS-G, 3,5 VÖLKEL 67135
• 1x Drill bits, HSS-G, 4,0 VÖLKEL 67140
• 1x Drill bits, HSS-G, 4,5 VÖLKEL 67145
• 1x Drill bits, HSS-G, 5,0 (M6) VÖLKEL 67150
• 1x Drill bits, HSS-G, 5,5 VÖLKEL 67155
• 1x Drill bits, HSS-G, 6,0 VÖLKEL 67160
• 1x Drill bits, HSS-G, 6,5 VÖLKEL 67165
• 1x Drill bits, HSS-G, 7,0 VÖLKEL 67170
• 1x Drill bits, HSS-G, 7,5 VÖLKEL 67175
• 1x Drill bits, HSS-G, 8,0 VÖLKEL 67180
• 1x Drill bits, HSS-G, 8,5 (M10) VÖLKEL 67185
• 1x Drill bits, HSS-G, 9,0 VÖLKEL 67190
• 1x Drill bits, HSS-G, 9,5 VÖLKEL 67195
• 1x Drill bits, HSS-G, 10,0 VÖLKEL 67198

• Product type: Twist drill set
• Size range: 1.0 – 10.0 mm
• Tool material: HSS-G
• Drive: Hexagon drive

Use it for general drilling and for many hole preparation tasks before tapping when the specified drill size is part of the set range.

A set keeps the common sizes together so drilling and thread preparation can start without searching for loose tools.

No. Specialist materials and tight tolerance work may still require a dedicated drill geometry and process setup.

VD 23 catalog as PDF

Yes. In many workshop jobs, one of the drill sizes from the set is used to prepare the starting hole before tapping.

Check workholding, drill condition, coolant strategy, and that the selected size matches the required hole on the drawing.