After you've installed a thread insert, the driving tang remains. This tang has served its purpose and must now be removed so that a screw can be inserted without obstruction. The V-COIL Tang Breaker số 14 is the precise tool designed to perform this task safely and without damaging the newly repaired thread.
The tool is specifically designed to cleanly snap off the tang at its predetermined breaking point. The result is a clear, intact thread that is ready for immediate use.
Why does the tang have to be removed at all?
The driving tang is an important component of the thread insert, needed for installation. It serves as a drive aid to screw the insert into the hole. Once the insert is firmly in place, the tang has fulfilled its function and would block the insertion of a screw, which is why it must be removed.
What thread sizes is the tang breaker suitable for?
The tang breaker is primarily designed for smaller thread inserts. For thread inserts from M13 and above, the tangs are usually larger and can typically be broken off easily with a pair of needle-nose pliers.
Can I remove the tang without the tang breaker?
For very small thread inserts, it is almost impossible to cleanly remove the tang without a special tool. The tang breaker snaps the tang off precisely at the predetermined breaking point, which minimizes the risk of damaging the thread. For larger inserts from M13, using needle-nose pliers is a common alternative.
| Tiêu chuẩn | Works Standard |
|---|---|
| Kích thước | No. 14 |
| EAN | 4022835070146 |
| Mã hàng | 07014 |
Hãy là người đầu tiên đánh giá “Dụng cụ bẻ chân ren cấy số 14”
