Home Mũi taro ren HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5

Mũi taro ren

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5

Name: HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5
Brand: VOLKEL
SKU: 67773
Price: 2018000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5 by VÖLKEL, item no. 67773, suitable for cutting internal threads.

SKU: 67773

2.018.000 đ

Price includes VAT

Description

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5

You use this threading bit to cut internal threads with a hex drive setup, which is practical for assembly, service, and field work.

Check that your hole preparation and holder setup match the tool style, since misalignment is a common cause of poor thread quality. M denotes ISO metric thread designation used for common metric screw threads in machine building and maintenance. HSS-G indicates a ground high speed steel tool, typically selected when edge definition and repeatability matter.

Application

Create internal threads in prepared holes for fasteners and assemblies.
Practical for assembly and service work where you use a compact hex drive interface.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition
Use stable workholding, because movement during the start often causes oversize threads.

Note Use cutting fluid suitable for the work material and keep the tool aligned during the first turns.

Benefits

Compact drive concept for access restricted tapping points
Easy integration with reversible drills and bit holders
Supports quick tool changes in assembly and service work
Practical for on site thread maintenance tasks
Suitable for routine use in metal fabrication and plant engineering service

Drawbacks

Sensitive to misalignment, especially during the first turns
Practical speed is limited by manual handling and by access conditions at the workpiece

Step by step

Prepare the hole and remove burrs so the tool starts straight.
Clamp the workpiece securely and align the tool to the hole axis.
Use a suitable holder or drive and apply cutting fluid for the work material.
Start the thread with controlled feed and keep the tool guided through the first turns.
Continue with steady torque and clear chips from the cutting area as needed.
Reverse to remove the tool, then clean the thread and the tool flutes.
Check the thread with the intended fastener or a suitable gauge and protect the part.

Scope of supply

1 piece HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - M 24 x 0.5

Technical features

Product type: Threading Bit
Thread designation: M
Chamfer form: Form C
Tool material: HSS-G

Frequently asked questions (FAQ)

How do you select the correct thread designation for this product Match the thread designation in the product name to the mating fastener or component standard, then confirm that your workpiece material and process setup suit the tool type. If you work with mixed standards, separate your tooling by thread family to avoid mix ups. What drive tools can you use with a threading bit Use a reversible drive tool that matches the hex drive in the product name, such as a bit holder or a drill driver with reverse. Keep speed low and alignment straight. If the thread is critical, finish with a controlled hand feel. Which hole preparation checks matter most Prepare the entry edge, remove burrs, and keep the hole clean so the tool starts straight. In blind holes, confirm that there is enough depth for the tool lead and chip space. In through holes, support chip evacuation out of the exit side. How do you reduce the risk of misalignment Start the tool with the axis visually aligned, then guide it through the first turns with low torque. Use stable workholding and avoid side load. If a thread feels tight early, remove the tool, clean chips, and inspect the entry. Can you use this in repair work Yes, for many workshop repairs you can use the tool to restore a usable thread when the base material is still intact. Clean damage first and avoid forcing, since distorted threads can increase torque and edge wear. For heavily stripped threads, a thread repair insert system can be the better option. Where can you find the full VÖLKEL catalog section for this product family VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric-fine ISO-thread
Standard	Works Standard
Form	Form C
Material	HSS-G
Tolerance	ISO2 (6H)
Size	M 24 x 0.5
Overall length (L1)	80 mm
Thread length (L2)	24 mm
Thread length (L4)	24 mm
Core hole diameter (D1)	23.5 mm
Width across flat (SW1)	mm mm
Width across flat (SW2)	mm mm
EAN	4022835677734
Item number	67773
Type of flute	straight fluted
Application	for through and blind holes
Thread standard	DIN 13