Machine Tap DIN 374 Form B HSSE - M 10 x 0.5

Name: Machine Tap DIN 374 Form B HSSE - M 10 x 0.5
Brand: VOLKEL
SKU: 39602
Price: 577000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Machine Tap DIN 374 Form B HSSE - M 10 x 0.5 by VÖLKEL, item no. 39602, suitable for cutting internal threads.

SKU: 39602

577.000 đ

Price includes VAT

Description

Machine Tap DIN 374 Form B HSSE - M 10 x 0.5

This tool is used to cut an internal thread in a drilled hole when you need repeatable form and fit. A machine tap is used when you need repeatable threads in series production.

Select the correct thread designation and ensure that the pre hole and chamfer preparation match the tool and material. M indicates an ISO metric thread, where you match nominal size and pitch to the mating thread. HSSE indicates cobalt alloyed high speed steel, commonly selected for tougher materials and stable cutting performance.

Application

Cut internal threads in drilled holes for fasteners, fittings, and mechanical assemblies.
Use in mechanical engineering, metal fabrication, and maintenance work where controlled threading is required.
Start the tap square to the hole to reduce risk of cross starting and uneven flank load.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition

Note For consistent results, deburr the entry and keep the cutting area clean during use.

Benefits

Controlled internal thread cutting with direct process feedback
Suitable for repair work, prototyping, and general workshop machining
Supports repeatable thread fit when the pre hole and alignment are correct
Applicable across maintenance and production environments

Drawbacks

Not suitable for brittle or abrasive materials without adapted cutting strategy and tool choice.
Manual or guided threading can be slow for high throughput applications.

Step by step

Prepare the hole with a correct core diameter and a clean entry chamfer.
Secure the workpiece and align the tool square to the hole axis.
Apply suitable cutting lubricant for the material and process.
Start the tool with controlled torque until it is guided by the thread form.
Advance with steady turns or a guided feed while keeping alignment constant.
Withdraw the tool at intervals and clear chips from the flutes.
Continue until the required thread depth is reached, then remove the tool fully.
Clean the thread and check fit with a matching screw or gauge.

Scope of supply

1 piece Machine Tap DIN 374 Form B HSSE - M 10 x 0.5

Technical features

Tool type: Machine tap
Reference standard: DIN 374
Thread system: ISO metric
Material or coating: HSSE

Frequently asked questions (FAQ)

How do you confirm that the thread system matches the mating part? Match the designation on the tool to the drawing and the mating fastener or gauge. For inch and pipe threads, confirm thread family and fit class before you start machining. What does the designation M 10 x 0.5 mean on this tool? It defines the thread family and size that the tool is designed to produce or inspect. Use it only on matching parts and avoid mixing similar inch series. Where can you find additional technical information for this tool type? Use this document for further selection and application notes. Technical information machine taps as PDF How do the material and coating designations affect selection? These designations describe tool material and surface treatment. Use them to match wear resistance and toughness needs to your material and process, without changing thread geometry. What are common causes of poor thread quality? Misalignment at the start, an incorrect pre hole, or insufficient lubrication can increase torque and damage flanks. Clean chips from the tool and verify setup rigidity. Where can you find catalog information for this product family? Use the product catalog for overview tables and selection context. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric-fine ISO-thread
Standard	DIN 374
Form	Form B
Material	HSSE
Tolerance	ISO2 (6H)
Size	M 10 x 0.5
Overall length (L1)	90 mm
Thread length (L2)	20 mm
Core hole diameter (D1)	9.5 mm
Shank diameter (D2)	7.0 mm
Drive connector	5.5 mm
EAN	4022835396024
Item number	39602
Type of flute	straight fluted
Application	for through holes
Thread standard	DIN 13