Home Mũi taro ren Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5

Mũi taro ren

Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5

Name: Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5
Brand: VOLKEL
SKU: 27646
Price: 542000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5 by VÖLKEL, item no. 27646, suitable for cutting internal threads.

SKU: 27646

542.000 đ

Price includes VAT

Description

Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5

Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5 is intended for practical thread production where you need repeatable results in a workshop or on site.

Plan the operation with suitable cutting fluid and a stable holder so the tap enters straight and the chips can evacuate without jamming.

Application

Cut internal threads in predrilled holes in mechanical engineering, maintenance, and metal fabrication.
Use for ISO metric threads as designated in the product name.
Use for blind holes or through holes based on lead form and flute geometry.
Use a tap wrench that clamps the shank securely and supports straight entry.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition

Note Verify the exact designation, standard, and tolerance in the product name before you start.

Benefits

Good control during manual tapping when you keep the tap aligned and lubricated.
Simple inspection using a suitable screw or gauge after cleaning the thread.
Clear assignment to ISO metric threads through the designation in the product name.
Practical for repair and fit adjustment work in service environments.
Stepwise load distribution when you work with a set and follow the correct sequence.

Drawbacks

Not suitable for hard to machine materials without defined cutting data and stable machine rigidity.
Not intended for high output production where dedicated high performance tooling is required.

Step by step

Secure the workpiece so the hole axis stays stable during manual force.
Select the correct tap from the set and confirm the thread designation on the tool.
Apply suitable cutting fluid to the tap and the hole entry.
Start the tap square to the surface and turn with controlled hand force.
Reverse periodically to clear chips and reduce load on the cutting edges.
Continue with the next tap in the sequence until the required depth is reached.
Back the tool out fully and clean the thread with a brush and fluid.
Verify the thread with the mating screw and rework only if required.

Scope of supply

The provided product data does not include an itemized scope of supply for Hand Tap set of 3 pieces DIN 352 HSS-G non-serial form - M 10 x 1.5. If your process requires accessories such as holders or cutting fluid, select them separately based on your setup.

Technical features

Product type: hand tap set
Thread designation: M 10 x 1.5
Thread system: ISO metric
Standard: DIN 352
Tool material: HSS-G, HSS
Surface finish: ground
Tolerance class: ISO 2 (6H)

Frequently asked questions (FAQ)

How do you select the correct variant for your drawing Match the thread designation in the product name to the drawing and the mating fastener. Confirm thread series, pitch, and class of fit before you start, especially for inch based threads. Is this tap suitable for blind holes or through holes The suitability depends on flute geometry and lead form noted in the product name. Spiral flute execution is typically chosen for blind holes because chips are transported out of the hole. Where can you find technical background information for this tap type Use this PDF for technical notes, application limits, and terminology. Technical information hand taps as PDF Which tolerance class do you typically achieve The typical tolerance class for this execution is ISO 2 (6H) when the process is set up correctly and the hole preparation matches the thread system. Do you need cutting fluid Yes, use suitable cutting fluid for the material to reduce friction and control chip formation. Keep lubrication consistent from start to finish and clean the tool after use. Which holder should you use Use a holder that clamps the shank securely and supports straight entry. In manual work this is typically a tap wrench, and in machines a tapping chuck or a suitable collet holder. Where can you find the VÖLKEL catalog for additional variants and technical context Use the catalog for the full program and selection guidance. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric ISO-thread
Standard	DIN 352
Material	HSS-G
Tolerance	ISO2 (6H)
Size	M 10 x 1.5
Overall length (L1)	70 mm
Thread length (L2)	24 mm
Core hole diameter (D1)	8.5 mm
Shank diameter (D2)	7.0 mm
Drive connector	5.5 mm
EAN	4022835276463
Item number	27646
Type of flute	straight fluted
Application	for through and blind holes
Thread standard	DIN 13