Home Mũi taro ren Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH

Mũi taro ren

Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH

Name: Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH
Brand: VOLKEL
SKU: 26051
Price: 3320000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH by VÖLKEL, item no. 26051, suitable for cutting internal threads.

SKU: 26051

3.320.000 đ

Price includes VAT

Description

Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH

Use this tool when you need reliable thread creation or re-tapping on the shop floor. Correct preparation, alignment, and lubrication are the main practical checkpoints.

Metric ISO identifies ISO metric threads defined by the M designation and used across general engineering. HSS-G indicates ground high speed steel, typically used when you need a clean profile and stable tool guidance.

Application

Cut or restore internal threads in pre-drilled holes in maintenance work, prototyping, and controlled small batch production.
Select the tool by the thread designation and standard stated in the product name and keep the tool square to the bore axis.
Use cutting fluid matched to the material to reduce friction and support chip evacuation from the flutes.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition

Note Verify the workpiece preparation before you start and stop if torque increases unexpectedly.

Benefits

Controlled internal thread cutting for workshop and maintenance tasks.
Supports clean thread start when you keep the tap aligned and use suitable lubrication.
Fits common tapping workflows for through holes and blind holes as stated in the product name.
Useful for repair tapping when you need manual feel and torque feedback.

Drawbacks

Not suitable for very hard or highly abrasive materials where carbide tooling is required.
Not suitable for high volume production tapping where cycle time is critical.

Step by step

Confirm the thread designation in the product name and prepare a suitable core hole for that thread system.
Chamfer the hole edge and remove burrs so the tap starts cleanly.
Secure the tap in a suitable holder and align it square to the bore axis.
Apply cutting fluid matched to the material and start with steady torque.
Advance with controlled feed and briefly back off when torque rises to clear chips.
Continue until the required depth is reached, then reverse out fully.
Clean the thread and verify fit with a matching fastener or gauge.

Scope of supply

2 pieces Hand Tap set of 2 pieces DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH

Technical features

Tool type: Hand tap
Thread system: Metric ISO
Thread direction: Left hand
Tool material: HSS-G
Standard: DIN 2181

Frequently asked questions (FAQ)

How do you select the correct tool variant from the product name? Match the thread designation and standard stated in the product name to your drawing or the mating fastener. Confirm whether you need an internal or external thread tool and whether the thread is left hand or right hand. What does the thread designation in the product name mean? Metric ISO identifies ISO metric threads defined by the M designation and used across general engineering. How can you get more detailed guidance on hand tapping? Technical information hand taps as PDF How do you reduce the risk of cross-threading at the start? Prepare a clean chamfer and keep the tool axis aligned with the hole or rod axis. Start with controlled torque and stop if the tool tilts or binds. How do you verify the result after threading? Use the mating part or a suitable thread gauge to confirm smooth engagement and correct fit. Clean the thread first so chips do not mask the result. Where can you find more product and application information in a catalog? VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric-fine ISO-thread
Standard	DIN 2181
Material	HSS-G
Tolerance	ISO2 (6H)
Size	M 24 x 2.0 LH
Overall length (L1)	90 mm
Thread length (L2)	22 mm
Core hole diameter (D1)	22.0 mm
Shank diameter (D2)	18.0 mm
Drive connector	14.5 mm
EAN	4022835260516
Item number	26051
Type of flute	straight fluted
Application	for through and blind holes
Thread standard	DIN 13

Optional Accessories

SKU	Image	Price VNĐ	Product name & short description
26051-1		1.660.000	Hand Tap Rougher DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH Hand Tap Rougher DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH by VÖLKEL, item no. 26051-1, suitable for cutting internal threads.
26051-2		1.660.000	Hand Tap Finisher DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH Hand Tap Finisher DIN 2181 HSS-G left hand thread - M 24 x 2.0 LH by VÖLKEL, item no. 26051-2, suitable for cutting internal threads.