Bộ tara bàn ren, HSS-G, 3-12

Name: Bộ tara bàn ren, HSS-G, 3-12
Brand: VOLKEL
SKU: 49114
Price: 5920000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá) • Đã bán 0

Bộ tara bàn ren, HSS-G, 3-12 VÖLKEL, mã 49114, phù hợp cho cắt ren trong và ren ngoài trong xưởng cơ khí.

SKU: 49114

5.920.000 đ

Trạng thái kho: Hết hàng

Giá đã bao gồm VAT

Mô tả

Bộ tara bàn ren, HSS-G, 3-12

This Bộ tara bàn ren covers a practical metric range for internal and ren ngoài work in one package. You use it when workshop maintenance, fabrication, or repair work needs both taps and dies ready to hand. The set format supports faster preparation than collecting the components separately.

HSS-G indicates a ground high speed thép tool, which is typically selected when you want accurate geometry and a clean cutting action.

Ứng dụng

Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
Select the tool by the thread system, size, and form stated in the product name before the job begins.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.

Lưu ý Confirm thread designation, holder concept, and workpiece condition before you start the operation.

Lợi ích

Internal and ren ngoài tools are kept together in one general purpose assortment.
Metric range supports everyday workshop tasks without separate sourcing.
Set organization simplifies storage and job preparation.
Useful for maintenance, repair, and fabrication environments.

Hạn chế

General assortments are not optimized for every specialty material or production cycle time.
It is a service assortment, not a dedicated high performance production package.

Các bước thực hiện

Select the needed size from the set according to the required internal or ren ngoài.
Prepare the hole or workpiece outside diameter and secure the part against movement.
Mount the chosen tap or die in the correct holder from the set.
Start the threading operation square to the workpiece with steady manual control.
Use suitable Chất bôi trơn cắt gọt ren and clear chips from the cutting zone as the operation progresses.
Check the thread, clean the tools, and store the set components back in their places.

Phạm vi cung cấp

M 3 x 0.5 (VÖLKEL 27426)
M 4 x 0.7 (VÖLKEL 27430)
M 5 x 0.8 (VÖLKEL 27434)
M 6 x 1.0 (VÖLKEL 27438)
M 8 x 1.25 (VÖLKEL 27442)
M 10 x 1.5 (VÖLKEL 27446)
M 12 x 1.75 (VÖLKEL 27450)

Đặc tính kỹ thuật

Product type: Bộ tara bàn ren
Tool material: HSS-G

Câu hỏi thường gặp (FAQ)

How do you choose the correct product variant?: Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.
How do you decide whether the product fits your process?: Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.
What should you inspect before the threading operation?: Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.
Where can you read more about hand tapping?: Technical information Mũi taro ren tay (tạo ren trong) as PDF
Can you use this product for repair work as well as new threads?: In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.
Where can you find the full threading tools catalog?: VD 23 catalog as PDF
What is the main selection checkpoint after size matching?: After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or ren ngoài condition.