S.F.1 Mũi taro ren tay (tạo ren trong) and Bàn ren ngoài (tạo ren ngoài) (set of 50 pcs.) incl. drills M 3 – M 12

• Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
• Select the tool by the thread system, size, and form stated in the product name before the job begins.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.

Lưu ý Confirm thread designation, holder concept, and workpiece condition before you start the operation.

• One assortment covers both internal and ren ngoài tasks across the named range.
• Set organization speeds up selection during maintenance and workshop work.
• Useful for service benches where several common thread sizes must stay ready.
• A shared case or set structure improves storage control and completeness checks.

• A set cannot replace a specialized single tool program for every material and production condition.
• It is a workshop set, not a replacement for dedicated production tooling optimized around one thread size.

1. Select the required size and decide whether the job needs an internal or ren ngoài tool from the set.
2. Prepare the hole or outside diameter and secure the workpiece for accurate alignment.
3. Mount the chosen tap or die in the matching holder from the set.
4. Start the thread square to the workpiece and keep the holder under controlled manual guidance.
5. Continue the cut with suitable Chất bôi trơn cắt gọt ren and remove chips from the work area as required.
6. Check the finished thread, clean the tool, and return each component to the set after use.

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 3 (27326)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 4 (27330)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 5 (27334)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 6 (27338)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 8 (27342)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 10 (27346)

• 1x HSS-G Mũi taro ren tay (tạo ren trong) (set of 3 pcs.) M 12 (27350)

• 1x HSS Mũi khoan xoắn 2,50 mm (M 3)

• 1x HSS Mũi khoan xoắn 3,30 mm (M 4)

• 1x HSS Mũi khoan xoắn 4,20 mm (M 5)

• 1x HSS Mũi khoan xoắn 5,00 mm (M 6)

• 1x HSS Mũi khoan xoắn 6,80 mm (M 8)

• 1x HSS Mũi khoan xoắn 8,50 mm (M 10)

• 1x HSS Mũi khoan xoắn 10,20 mm (M 12)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 3 (27426)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 4 (27430)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 5 (27434)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 6 (27438)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 8 (27442)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 10 (27446)

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 12 (27450)

• 1x Guides for Bàn ren ngoài (tạo ren ngoài) (set of 7 pcs.) M 3 - M 12 (15100)

• 1x Tay quay taro điều chỉnh, zinc die cast số 1 (13010)

• 1x Tay quay taro điều chỉnh, zinc die cast số 2 (13020)

• 1x Tay quay bàn ren, zinc die cast 20x5 mm (15002)

• 1x Tay quay bàn ren, zinc die cast 20x7 mm (15003)

• 1x Tay quay bàn ren, zinc die cast 25x9 mm (15004)

• 1x Tay quay bàn ren, zinc die cast 30x11 mm (15005)

• 1x Tay quay bàn ren, zinc die cast 38x14 mm (15007)

• 1x Tap holder with ratchet, size 1 (10001)

• Product type: Tap and die assortment
• Thread system: M
• Included groups: Mũi taro ren tay (tạo ren trong), Bàn ren ngoài (tạo ren ngoài), Tay quay bàn ren, tap wrenches, tap holders, and drills

Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.

Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.

Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.

Technical information Bàn ren ngoài (tạo ren ngoài) as PDF

In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.

VD 23 catalog as PDF

After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or ren ngoài condition.