P.V.1 Mũi taro ren tay (tạo ren trong), non-serial and Bàn ren ngoài (tạo ren ngoài) (set of 43 pcs.) incl. drills M 3 – M 12
You select this assortment when you need a ready stock of hand tapping and ren ngoài cutting tools for recurring workshop use. The product name defines the covered thread system and range, which supports quick selection during maintenance and repair work. The set structure also helps with storage and tool control.
The M designation identifies ren hệ mét ISO that are standard across general engineering, maintenance, and machine building.
- Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
- Select the tool by the thread system, size, and form stated in the product name before the job begins.
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
- Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.
Lưu ý Confirm thread designation, holder concept, and workpiece condition before you start the operation.
- One assortment covers both internal and ren ngoài tasks across the named range.
- Set organization speeds up selection during maintenance and workshop work.
- Useful for service benches where several common thread sizes must stay ready.
- A shared case or set structure improves storage control and completeness checks.
Hạn chế
- A set cannot replace a specialized single tool program for every material and production condition.
- It is a workshop set, not a replacement for dedicated production tooling optimized around one thread size.
- Select the required size and decide whether the job needs an internal or ren ngoài tool from the set.
- Prepare the hole or outside diameter and secure the workpiece for accurate alignment.
- Mount the chosen tap or die in the matching holder from the set.
- Start the thread square to the workpiece and keep the holder under controlled manual guidance.
- Continue the cut with suitable Chất bôi trơn cắt gọt ren and remove chips from the work area as required.
- Check the finished thread, clean the tool, and return each component to the set after use.
- 1x Tap holder with Ratchet for right- and left-hand-turn, size 1 VÖLKEL 10001
- 1x Adjustable Tap Wrenches DIN 1814 size 1 VÖLKEL 13010
- 1x Adjustable Tap Wrenches DIN 1814 size 2 VÖLKEL 13020
- 1x Tay quay bàn ren, Zinc die cast (mm) DIN 225 (DIN EN 22568) size 20 x 5 VÖLKEL 15002
- 1x Tay quay bàn ren, Zinc die cast (mm) DIN 225 (DIN EN 22568) size 20 x 7 VÖLKEL 15003
- 1x Tay quay bàn ren, Zinc die cast (mm) DIN 225 (DIN EN 22568) size 25 x 9 VÖLKEL 15004
- 1x Tay quay bàn ren, Zinc die cast (mm) DIN 225 (DIN EN 22568) size 30 x 11 VÖLKEL 15005
- 1x Tay quay bàn ren, Zinc die cast (mm) DIN 225 (DIN EN 22568) size 38 x 14 VÖLKEL 15007
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 3 x 0.5 VÖLKEL 27426
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 4 x 0.7 VÖLKEL 27430
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 5 x 0.8 VÖLKEL 27434
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 6 x 1.0 VÖLKEL 27438
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 8 x 1.25 VÖLKEL 27442
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 10 x 1.5 VÖLKEL 27446
- 1x Bàn ren ngoài (tạo ren ngoài), DIN 223 (DIN EN 22568), HSS-G, M 12 x 1.75 VÖLKEL 27450
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 3 x 0.5 VÖLKEL 27626
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 4 x 0.7 VÖLKEL 27630
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 5 x 0.8 VÖLKEL 27634
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 6 x 1.0 VÖLKEL 27638
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 8 x 1.25 VÖLKEL 27642
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 10 x 1.5 VÖLKEL 27646
- 1x Mũi taro ren tay (tạo ren trong) set, non-serial, DIN 352, HSS-G, M 12 x 1.75 VÖLKEL 27650
- Product type: Tap and die assortment
- Thread system: M
- Included groups: Mũi taro ren tay (tạo ren trong), Bàn ren ngoài (tạo ren ngoài), Tay quay bàn ren, tap wrenches, and tap holders
- How do you choose the correct product variant?
Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.
- How do you decide whether the product fits your process?
Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.
- What should you inspect before the threading operation?
Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.
- Where can you read more about Bàn ren ngoài (tạo ren ngoài) and ren ngoài cutting?
Technical information Bàn ren ngoài (tạo ren ngoài) as PDF
- Can you use this product for repair work as well as new threads?
In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.
- Where can you find the full threading tools catalog?
VD 23 catalog as PDF
- What is the main selection checkpoint after size matching?
After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or ren ngoài condition.
Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.
