With the V-COIL Inserting Tool M 14 x 1,25, you can install wire thread inserts quickly, cleanly and with high repeat accuracy. The 1/4" square drive allows you to use a ratchet, torque wrench or suitable power tools — ideal for workshop and production environments.
Follow these steps for a clean and precise installation:
1. Which inserts is this tool compatible with?
This tool is designed for wire thread inserts in size M 14 x 1,25 and fits V-COIL and many equivalent systems.
2. Can I use the tool manually?
Yes — you can use it manually, but a 1/4" drive ratchet or torque wrench ensures more consistent results.
3. Does this tool remove old inserts?
No. This tool is only for installation. Removing inserts requires a dedicated extraction tool.
4. Do I need to break off the tang?
For inserts with a tang, you must break it off after installation using the appropriate tang-break tool.
5. What if the insert is not aligned properly?
Check the hole and thread for damage or debris. If everything is fine, remove the insert and install a new one.
6. Can I use this tool in tight spaces?
Yes — its compact design allows access to difficult or confined areas.
7. How should I clean the thread before installation?
Use compressed air, a thread brush and a lint-free cloth to remove oil and debris.
8. How do I know the insert is positioned correctly?
The insert should sit flush or slightly below the surface. Check visually and dimensionally.
Do you need help or want to request a quotation?
Use the contact form.
| Standard | Works Standard |
|---|---|
| Size | M 14 x 1,25 |
| Drive connector | 1/4" |
| EAN | 4022835081937 |
| Item number | 08193 |
| Application | M 14 x 1,25 |
Be the first to review “V-COIL Inserting Tool (Drive connector 1/4") M 14 x 1,25”
