V-COIL Inserting Tool (Drive connector 3/4") M 45 x 3.0

The V-COIL Inserting Tool is ideal for:

• Machine installation of thread inserts into newly cut receiving threads.
• Quick and precise thread repair and reinforcement.

Benefits at a glance:

• With Hex Drive: The integrated hex drive allows for easy and secure attachment to various drive tools.
• For Manual or Cordless Drill Operation: The tool is flexible to use and is suitable for both manual applications with a suitable wrench or ratchet and for efficient machine use with a cordless drill, which saves time and effort.
• No Manual Adjustment during Installation: The design of the tool ensures an automatic and correct positioning of the thread insert, eliminating manual adjustment and reducing the error rate.
• Handy even in hard-to-reach places: Thanks to its design, the tool also allows for the installation of thread inserts in tight or difficult-to-access work areas.

The use of the V-COIL Inserting Tool is simple and efficient:

1. Prepare the Thread: Ensure that the receiving thread (the thread into which the V-COIL insert is screwed) has been correctly cut with the appropriate V-COIL tap.
2. Mount the Insert: Take a V-COIL thread insert for M45 x 3.0 and carefully screw it onto the end of the inserting tool until it is seated firmly.
3. Insert: Insert the tool with the mounted thread insert into the prepared receiving thread. Screw the thread insert in the direction of the thread with light pressure. Whether operating manually or with a cordless drill, ensure a consistent and slow feed. The insert will automatically cut itself into the thread.
4. Break the Tang: After the thread insert is fully installed, the driving tang of the insert must be broken off. This is usually done with a tang break-off tool.

1. What does "V-COIL" stand for?
V-COIL is a well-known system for repairing and strengthening threads. It uses helical wire thread inserts made of high-strength stainless steel wire, which are screwed into a prepared thread to create a robust and wear-resistant internal thread.

2. Can I use this tool for other thread sizes?
No, this specific inserting tool is designed for the nominal size M45 x 3.0. For other thread sizes, you will need the corresponding V-COIL inserting tool.

3. Do I need a special tap to cut the receiving thread?
Yes, for the V-COIL system to function correctly, it is crucial to use a special V-COIL tap that creates the exact tolerances for the thread insert.

4. Can I use the tool without a cordless drill?
Yes, the 3/4" hex drive also allows for use with a suitable ring wrench, ratchet, or T-handle to manually screw in the thread insert.

5. What is the advantage of the hex drive?
The hex drive allows for high torque transmission and a secure hold in the drill chuck or a suitable wrench. This is especially important for large thread diameters such as M45.

• Standard: Factory Standard
• Nominal Size: M 45 x 3.0
• Drive Connector: 3/4"
• EAN: 4022835080442
• Item Number: 08044
• Application Range: M 45 x 3.0