Tay quay bàn ren Holder Zinc Die-Cast 16 x 5 mm (5 chiếc)
This Tay quay bàn ren holder is designed for the controlled clamping of Bàn ren ngoài (tạo ren ngoài) and supports clean guidance on the workpiece. A typical use is for clamping dies during cắt ren.
Especially in metal construction and plant engineering, a stable holder makes starting easier because you can guide the die in a controlled manner on the workpiece. The zinc die-cast design is intended for workshop use.
- Clamp Bàn ren ngoài (tạo ren ngoài) and guide them manually when cutting ren ngoài
- Start threads on bolts, shafts, or threaded rods in a controlled manner
- Use in single-part production, repair, and rework
- Suitable for workshop tasks in mechanical engineering, metal construction, and maintenance
Lưu ý Pay attention to clean alignment at the start and use a suitable cutting oil depending on the material.
- Stable clamping for Bàn ren ngoài (tạo ren ngoài)
- Better control when starting the ren ngoài
- Even power transmission via two handles
- Quick tool change depending on the version
Disadvantages
- Limited suitability for very hard or tough materials without suitable cutting conditions
- Not ideal when highly automated or highly dynamic machining is required
- Check the die and holder for cleanliness and remove any adhering residues.
- Open the clamping mechanism and insert the die flat into the holder.
- Align the die so that it is clamped evenly and does not tilt.
- Fix the clamping mechanism and check the secure fit by lightly turning against the handles.
- Position the holder square to the workpiece axis and start cutting with steady guidance. Further handling notes can be found in the Technical Information Die Nuts PDF: Technical Information Die Nuts PDF
- Work with even torque and guide the holder steadily so that alignment is maintained.
- After use, release the clamping mechanism, remove the die, and clean both parts.
- 5x Tay quay bàn ren Holder Zinc Die-Cast 16 x 5 mm
- Design: Tay quay bàn ren holder
- Material: Zinc die-cast
- Application: ren ngoài with dies
- Dimension: 16 x 5 mm, 5 mm
- Mounting/Clamping: Depending on holder and clamping mechanism
- What do you use a Tay quay bàn ren holder for?
- You clamp a Bàn ren ngoài (tạo ren ngoài) and guide it in a controlled way to cut an ren ngoài evenly.
- How do you align the die properly?
- Insert the die flat into the holder, clamp it evenly, and start square to the workpiece axis. Technical Information Die Nuts PDF
- What role does lubrication play when cutting ren ngoài?
- With a suitable cutting oil, you reduce friction and the risk of scoring. The selection depends on the material and the application.
- What does the 16 x 5 mm specification describe?
- The 16 x 5 mm specification corresponds to the version stated in the product name. For selection, it is crucial that it matches your die or tap.
- Where can you find further information and tables?
- Use the VD 23 catalog as PDF for technical notes, system overviews, and selection guides.
- What should you check before first use?
- Check whether the clamping surfaces are clean, whether the connection is free from play, and whether the alignment to the workpiece is correct.
Do you need support with selection or application?
Use the biểu mẫu liên hệ.
