V-COIL Ren cấy V-COIL, gói bổ sung kiểu tự do S UNC 3/8 x 16 - 1.5 D (5 pcs.)
Use this V-COIL Ren cấy V-COIL gói bổ sung when you need a durable ren trong after damage or repeated service work.
The insert form creates a new load carrying ren trong while keeping the parent material engagement as uniform as possible.
- Restore a damaged ren trong in housings, covers, flanges, and similar components.
- Use in maintenance work where a repaired thread reduces downtime and avoids part replacement.
- Support repeated assembly when the parent thread has lost strength from wear or overload.
Lưu ý Use preparation tools and installation steps required by your insert system and verify thread engagement after installation.
- Restores a usable ren trong without changing the original screw size concept.
- Supports repeatable repairs which helps in service work and spare part planning.
- Can improve load distribution compared with a worn parent thread depending on installation quality.
- Keeps insert stock compact when you use refill packs for recurring repairs.
- Supports controlled assembly torque when the repaired thread is prepared correctly.
Hạn chế
- Repair requires the correct preparation tools and a controlled installation process to avoid misalignment.
- Not ideal for emergency repairs without access to proper drilling, tapping, and installation equipment.
- Assess the damaged thread and decide whether a wire insert repair is required.
- Remove the damaged thread material with the correct preparation tool for the insert system.
- Create the required ren trong form with the matching STI tap for the insert process.
- Clean the thread area and remove chips so the insert seats without interference.
- Install the wire insert with the correct driving tool until it reaches the specified position.
- Remove the installation tang if the selected insert execution requires that step.
- Check screw engagement by hand to confirm smooth assembly and full thread support.
- 5 chiếc Ren cấy V-COIL, free running execution as stated in the product name
- System: V-COIL Ren cấy V-COIL
- Insert type: kiểu tự do S
- Thread designation: 1.5 D
- Insert length: 1.5 D
- Thread system: Inch thread
- Pack quantity: 5 chiếc
- When do you choose a Ren cấy V-COIL repair instead of taro lại ren the parent thread?
- Choose a wire insert when the parent thread no longer provides sufficient engagement or when you want to keep the original screw size without enlarging the hole.
- Does this insert match the thread designation 1.5 D?
- Match the designation in the product name with your screw thread standard and your prepared STI thread, then verify fit with a test fastener or a gauge as required by your process.
- What does kiểu tự do mean in practical assembly?
- Free running inserts keep normal running torque for the screw connection, so assembly feel stays close to a standard ren trong when the insert is installed correctly.
- How do you prevent an insert from sitting too high or too low?
- Control the driving tool position and stop when the insert reaches the required seating depth for your application, then verify that the first thread start is clean and unobstructed.
- What should you check after installation?
- Check smooth screw engagement by hand, confirm that the insert is seated without distortion, and ensure that no chips remain in the thread area.
- Where do you find technical background for this execution?
- Use the technical information for selection and process setup guidance. Technical information Ren cấy V-COIL DIN 8140 as PDF
- How do you keep the process stable in repeated operations?
- Use consistent preparation, stable guidance, and a clean working area so results remain comparable across batches.
- Where do you find the complete catalog context for this product class?
- For additional product and system information, use the catalog. VC 23 catalog as PDF
Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.
