Ren cấy M 52 x 3.0 - 1.5 D V-COIL, bộ 5 cuộn

• Restoring stripped or worn ren trong after the receiving thread has been prepared correctly
• Building a durable insert based ren trong in materials that benefit from improved wear resistance at the joint
• Using the insert in maintenance, overhaul and serial repair tasks with repeat fastener engagement
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Select the product by thread designation, workpiece condition and the holder concept used in your process.

• Matched repair logic supports repeatable restoration of an existing thread designation
• Insert based repair can improve service life of the receiving thread in repeated assembly work
• Suitable for maintenance, overhaul and workshop repairs where part replacement is undesirable
• Clear assignment between preparation, tapping and insert installation reduces handling errors

• The process depends on the correct repair sequence and is not suitable when the parent material is cracked or too thin for the repair concept.
• It is a repair system and not the fastest choice when you only need a one time emergency fix without the full preparation steps.

1. Prepare the damaged thread with the correct repair sequence before handling the insert.
2. Place the insert on the installation tool so the driving feature engages securely.
3. Start the insert square to the prepared receiving thread and keep the tool aligned.
4. Wind the insert into position with controlled feed until it sits correctly below the entry face.
5. Release the installation tool carefully so the insert remains stable in the thread.
6. Remove the tang where required and verify the repaired thread before assembly.

• 5 pcs V-COIL Ren cấy V-COIL kiểu tự do S M 52 x 3.0 - 1.5 D (5 pcs.)

• Product type: Ren cấy V-COIL
• Thread system: Metric ISO

What do you use V-COIL Ren cấy V-COIL kiểu tự do S M 52 x 3.0 - 1.5 D (5 pcs.) for?

You use this product when an ren trong must be restored, reinforced or prepared within a Ren cấy V-COIL repair process. The exact role depends on whether the product is the kit, the insert, the STI tool or the installation accessory.

Có thể xem thêm thông tin kỹ thuật ở đâu?

For additional technical background, see Technical information V-COIL sửa ren as PDF.

When do you choose a Ren cấy V-COIL instead of direct taro lại ren?

You choose the insert route when the original ren trong is damaged or when the receiving material benefits from a more durable insert based thread.

Có thể xem thêm tài liệu kỹ thuật liên quan ở đâu?

For a second related reference, see Technical information Ren cấy V-COIL DIN 8140 as PDF.

How do you identify the correct Metric ISO execution?

M denotes the ISO metric thread system used widely in mechanical engineering, maintenance and general fastener work where metric screw threads are standard.

Có thể xem mục catalog của nhóm sản phẩm này ở đâu?

For catalog level orientation, see VC 23 catalog as PDF.

Cần kiểm tra gì trước khi lắp ráp sau sửa ren?

Check that the repaired thread is clean, the insert sits correctly when applicable and the mating fastener engages smoothly without cross threading.