Mũi taro máy JIS B-4430 Form C 35° Spiral Flute HSSE - UNF 5/32 x 36

• Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
• Select the tool by the thread system, size, and form stated in the product name before the job begins.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Keep the hole type and tap geometry aligned so chip flow follows the intended tapping application.

Lưu ý Confirm thread designation, holder concept, and workpiece condition before you start the operation.

• Geometry and standard are already matched to the stated thread designation.
• Machine controlled use supports repeatability in series work and repair jobs.
• The named flute form helps you align the tool choice with the hole condition.
• HSSE or HSS tool material supports practical durability in cắt ren work.

• Performance depends on correct alignment, lubrication, and the intended hole condition for the named geometry.
• It is not intended to solve process problems caused by unsuitable machine synchronization or poor hole preparation.

1. Confirm that the thread designation and the hole type match the Mũi taro máy named in the product title.
2. Prepare the tapping hole and secure the workpiece so alignment remains stable throughout the operation.
3. Clamp the tap in a suitable holder that supports concentric guidance and controlled reversal.
4. Apply cutting fluid suited to the workpiece material and the tapping process.
5. Cut the thread with controlled feed so the tap follows the hole axis and the intended geometry.
6. Reverse the tap carefully, clear chips from the hole, and inspect the finished thread before assembly.

• 1 chiếc Mũi taro máy JIS B-4430 Form C 35° Spiral Flute HSSE - UNF 5/32 x 36

• Product type: Mũi taro máy
• Thread system: UNF
• Standard: JIS B-4430
• Form: Form C
• Flute design: Spiral flute
• Tool material: HSSE

How do you choose the correct product variant?

Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.

How do you decide whether the product fits your process?

Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.

What should you inspect before the threading operation?

Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.

Where can you read more about machine tapping?

Technical information machine taps as PDF

Can you use this product for repair work as well as new threads?

In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.

Where can you find the full threading tools catalog?

VD 23 catalog as PDF

What is the main selection checkpoint after size matching?

After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or ren ngoài condition.