Trang chủ Mũi taro ren Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 22 x 2.5

Mũi taro ren

Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 22 x 2.5

Name: Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 22 x 2.5
Brand: VOLKEL
SKU: 80470
Price: 2109000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 22 x 2.5 VÖLKEL, mã 80470, phù hợp cho gia công ren trong.

SKU: 80470

2.109.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 22 x 2.5

Use this Mũi taro ren tay (tạo ren trong) set for workshop and maintenance tapping where a staged cutting sequence improves control and surface finish. The execution follows ISO 529.

For consistent results, use the first tap only for lead-in, then rely on the later taps to bring the thread to its final form.

Ứng dụng

Cut ren trong manually with a progressive tap sequence for controlled lead-in and finishing.
Use a suitable Tay quay taro and change taps in sequence to reach the final thread form.
Process: manual driving or assisted driving depending on your holder and machine setup.
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition.

Lưu ý Use cutting fluid suited to the workpiece material and keep the tool clean and protected after use.

Lợi ích

Spreads cutting load across the staged sequence for better manual control
Enables controlled chip transport when cutting fluid and reversal are managed
Fits typical tap holding systems appropriate to the tool type
Helps you maintain process control across single parts and small batches
Keeps tool handling straightforward during tool change and inspection

Hạn chế

Limited suitability for very hard materials unless a dedicated execution is specified
Requires additional time for tool changes compared with a single tap process

Các bước thực hiện

Confirm the thread designation and ensure the hole is prepared and deburred.
Clamp the workpiece so the hole axis stays stable while you tap.
Mount the first tap of the set in a suitable Tay quay taro and align it to the hole axis.
Apply cutting fluid suited to the workpiece material.
Start the thread with steady torque while maintaining alignment.
Change to the next tap in the sequence when the lead-in is established.
Use the finishing tap to bring the thread to the final profile.
Clean the thread and the tools, then protect the cutting edges for storage.

Phạm vi cung cấp

3 chiếc: Mũi taro ren tay (tạo ren trong) as specified in the set

Đặc tính kỹ thuật

Tool type: Mũi taro ren tay (tạo ren trong) set
Standard: ISO 529
Tool material: HSS-G
Thread system: ISO metric
Tolerance class: 6H

Câu hỏi thường gặp (FAQ)

Why is a Mũi taro ren tay (tạo ren trong) set used instead of a single tap Use a set when you want a staged cutting sequence that starts the thread smoothly and finishes the profile with controlled torque. What tool do you use to drive the tap Use a Tay quay taro that holds the square drive securely and lets you maintain alignment to the hole axis. What preparation is required before you tap the thread Prepare the core hole to the correct size for the thread designation, remove burrs, and add a small lead-in chamfer so the tap can start without side load. How do you control chips and cutting fluid during tapping Use cutting fluid suited to the workpiece material and clear chips regularly, especially in deeper holes or tougher materials, to prevent chip packing and tool overload. Where can you find additional technical information for this execution Use the following PDF for reference on hand tapping handling: Technical information Mũi taro ren tay (tạo ren trong) as PDF How do you reduce risk of tap breakage Keep alignment stable, avoid side load at entry, and stop if torque rises sharply so you can inspect hole preparation, lubrication, and chip evacuation. Where can you find more product and application information in the VÖLKEL catalog Use this catalog for additional details and related items: VD 23 catalog as PDF How do you inspect the thread after tapping Check that the thread is clean, that the start is not damaged, and that the functional fit matches the mating component used in your assembly.

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric ISO-thread
Tiêu chuẩn	ISO 529
Vật liệu	HSS-G
Tolerance	ISO2 (6H)
Kích thước	M 22 x 2.5
Overall length (L1)	118 mm
Thread length (L2)	38 mm
Core hole diameter (D1)	19.5 mm
Shank diameter (D2)	16.0 mm
Drive connector	12.5 mm
EAN	4022835804703
Mã hàng	80470
Type of flute	straight fluted
Phạm vi ứng dụng	for through and blind holes
Chuẩn ren	DIN 13