Mũi taro ren tay (tạo ren trong) set of 3 chiếc ISO 529 HSS-G - M 2 x 0.4
Use this Mũi taro ren tay (tạo ren trong) set to start, form, and finish ren trong in a controlled way when you work with a Tay quay taro. The execution follows ISO 529.
Select the set based on the thread designation, then prepare the hole and use cutting fluid so the staged cutting path stays smooth. The thread designation is M 2 x 0.4.
- Cut ren trong manually with a progressive tap sequence for controlled lead-in and finishing.
- Use a suitable Tay quay taro and change taps in sequence to reach the final thread form.
- Process: manual driving or assisted driving depending on your holder and machine setup.
- Use: cắt ren, taro lại ren, and làm sạch ren depending on condition.
Lưu ý Use cutting fluid suited to the workpiece material and keep the tool clean and protected after use.
- Spreads cutting load across the staged sequence for better manual control
- Makes selection easier by referencing standard, form, and thread designation
- Supports predictable lead-in when you align the tool to the hole axis
- Helps you maintain process control across single parts and small batches
- Keeps tool handling straightforward during tool change and inspection
Hạn chế
- Limited suitability for very hard materials unless a dedicated execution is specified
- Requires additional time for tool changes compared with a single tap process
- Confirm the thread designation and ensure the hole is prepared and deburred.
- Clamp the workpiece so the hole axis stays stable while you tap.
- Mount the first tap of the set in a suitable Tay quay taro and align it to the hole axis.
- Apply cutting fluid suited to the workpiece material.
- Start the thread with steady torque while maintaining alignment.
- Change to the next tap in the sequence when the lead-in is established.
- Use the finishing tap to bring the thread to the final profile.
- Clean the thread and the tools, then protect the cutting edges for storage.
- 3 chiếc: Mũi taro ren tay (tạo ren trong) as specified in the set
- Tool type: Mũi taro ren tay (tạo ren trong) set
- Standard: ISO 529
- Tool material: HSS-G
- Thread system: ISO metric
- Tolerance class: 6H
- Why is a Mũi taro ren tay (tạo ren trong) set used instead of a single tap
- Use a set when you want a staged cutting sequence that starts the thread smoothly and finishes the profile with controlled torque.
- What tool do you use to drive the tap
- Use a Tay quay taro that holds the square drive securely and lets you maintain alignment to the hole axis.
- What preparation is required before you tap the thread
- Prepare the core hole to the correct size for the thread designation, remove burrs, and add a small lead-in chamfer so the tap can start without side load.
- How do you control chips and cutting fluid during tapping
- Use cutting fluid suited to the workpiece material and clear chips regularly, especially in deeper holes or tougher materials, to prevent chip packing and tool overload.
- Where can you find additional technical information for this execution
- Use the following PDF for reference on hand tapping handling: Technical information Mũi taro ren tay (tạo ren trong) as PDF
- How do you reduce risk of tap breakage
- Keep alignment stable, avoid side load at entry, and stop if torque rises sharply so you can inspect hole preparation, lubrication, and chip evacuation.
- Where can you find more product and application information in the VÖLKEL catalog
- Use this catalog for additional details and related items: VD 23 catalog as PDF
- How do you inspect the thread after tapping
- Check that the thread is clean, that the start is not damaged, and that the functional fit matches the mating component used in your assembly.
Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.
