Trang chủ Mũi taro ren Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 105 x 4.0

Mũi taro ren

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 105 x 4.0

Name: Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 105 x 4.0
Brand: VOLKEL
SKU: 28113
Price: 198201000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 105 x 4.0 VÖLKEL, mã 28113, phù hợp cho gia công ren trong.

SKU: 28113

198.201.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 105 x 4.0

You use this threading tool to generate or renew a thread in workshop production and maintenance work.

A clean start and stable guidance help you achieve a thread that assembles smoothly and supports predictable clamp load.

Ứng dụng

Cut ren trong in workshop work where manual control is preferred over machine feed.
Use for repair, rework, and short series operations where setup time needs to stay low.
Apply to lỗ thông and lỗ bít when the correct tap type is selected for the hole condition.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Select the variant stated in the product name and keep preparation and inspection steps aligned with your process documentation.

Lợi ích

Supports reliable thread engagement when the tool is guided straight and lubricated appropriately.
Helps you achieve consistent assembly feel across repeated operations in shop workflows.
Supports rework tasks where restoring thread quality prevents scrap.
Works well in maintenance routines when you need predictable handling and tool response.
Enables clear process planning when the tool type matches hole condition and material.

Hạn chế

Tool performance depends on workpiece material and condition, so you must select a suitable execution for the application.
Not designed for extreme high volume production without process control and dedicated machine tooling.

Các bước thực hiện

Prepare the workpiece thread area according to your process plan and remove burrs.
Align the tool square to the hole axis or shaft axis before you start cutting.
Apply a suitable cutting Chất bôi trơn cắt gọt ren to support smooth cutting action.
Drive the tool forward with steady rotation while you keep alignment stable.
Reverse the tool and remove chips from the flutes and the work area.
Clean the thread, then check assembly feel with a matching fastener or gauge.
Clean the tool and store it protected from impact and corrosion.

Phạm vi cung cấp

2 chiếc Mũi taro ren tay (tạo ren trong), DIN execution as stated in the product name

Đặc tính kỹ thuật

Tool type: Mũi taro ren tay (tạo ren trong)
Standard reference: DIN 2181
Tool material: HSS-G
Thread designation: M 105 x 4.0
Thread system: Metric thread
Pack quantity: 2 chiếc

Câu hỏi thường gặp (FAQ)

How do you choose between hand tapping and machine tapping? Choose hand tapping when you need close control and low setup effort, and choose machine tapping when you need repeatability and stable feed control. Can you cut the thread size M 105 x 4.0 with this tool? Use the thread designation in the product name to match the required thread, then follow your shop procedure for hole preparation, lubrication, and inspection. What causes a rough thread surface after cutting? Common causes include misalignment, unsuitable Chất bôi trơn cắt gọt ren, tool wear, or chips trapped in the flutes, so focus on straight guidance and clean working conditions. How do you extend tool life in routine use? Use a suitable Chất bôi trơn cắt gọt ren, avoid side load, keep cutting edges protected from impact, and replace the tool when cutting forces or thread quality change. How do you confirm thread quality without measuring equipment? You can check assembly feel with a matching fastener and look for smooth engagement, then use a gauge if your process requires documented conformity. Where do you find technical background for this execution? Use the technical information for selection and process setup guidance. Technical information Mũi taro ren tay (tạo ren trong) as PDF How do you keep the process stable in repeated operations? Use consistent preparation, stable guidance, and a clean working area so results remain comparable across batches. Where do you find the complete catalog context for this product class? For additional product and system information, use the catalog. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric-fine ISO-thread
Tiêu chuẩn	DIN 2181
Vật liệu	HSS-G
Tolerance	ISO2 (6H)
Kích thước	M 105 x 4.0
Overall length (L1)	280 mm
Thread length (L2)	75 mm
Core hole diameter (D1)	101.0 mm
Shank diameter (D2)	56.0 mm
Drive connector	44.0 mm
EAN	4022835281139
Mã hàng	28113
Type of flute	straight fluted
Phạm vi ứng dụng	for through and blind holes
Chuẩn ren	DIN 13

Phụ kiện tùy chọn

SKU	Hình	Giá VNĐ	Tên sản phẩm & mô tả ngắn
28113-1		99.099.000	Mũi taro ren tay (tạo ren trong) Rougher DIN 2181 HSS-G - M 105 x 4.0 Mũi taro ren tay (tạo ren trong) Rougher DIN 2181 HSS-G - M 105 x 4.0 VÖLKEL, mã 28113-1, phù hợp cho gia công ren trong.
28113-2		99.099.000	Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 HSS-G - M 105 x 4.0 Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 HSS-G - M 105 x 4.0 VÖLKEL, mã 28113-2, phù hợp cho gia công ren trong.