Trang chủ Mũi taro ren Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 7 x 0.5

Mũi taro ren

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 7 x 0.5

Name: Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 7 x 0.5
Brand: VOLKEL
SKU: 26319
Price: 472000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 7 x 0.5 VÖLKEL, mã 26319, phù hợp cho gia công ren trong.

SKU: 26319

472.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi taro ren tay (tạo ren trong) set of 2 chiếc DIN 2181 HSS-G - M 7 x 0.5

You use this Mũi taro ren tay (tạo ren trong) to cut ren trong where controlled manual feedback matters. The cutting geometry follows the execution stated in the product name so you can match it to your thread system and the hole condition.

If you work with lỗ bít you also consider the lead type and available run out space. After tapping you remove chips and protect both tool and thread from corrosion during storage.

Ứng dụng

Cutting of ren trong in steels and common engineering materials within the limits of the chosen execution
Use for series work, repair tasks, and general machining in mechanical engineering and metal fabrication
Suitable for lỗ thông and lỗ bít depending on the geometry stated in the product name
Use with a suitable Tay quay taro to guide the tool straight and to control torque by hand
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Keep the tool clean and lightly oiled after use to prevent corrosion and to protect cutting edges.

Lợi ích

Defined cutting geometry supports predictable thread form
Clear variant identification via standard and form in the product name
Suitable for workshop and series processes when lubrication and alignment are controlled
Supports rework and maintenance tasks without changing the workpiece design

Hạn chế

Tool life can drop in very hard or abrasive materials if the selected execution is not matched to the application
Not suitable for high performance applications when process parameters are not optimised

Các bước thực hiện

Confirm the thread designation, standard, and execution in the product name against your drawing and material specification.
Prepare the pre hole and entry chamfer according to your process specification and remove burrs from the opening.
Mount the tap in a suitable Tay quay taro and secure the clamping so the tool cannot slip under load.
Apply a suitable cutting Chất bôi trơn cắt gọt ren or coolant for the workpiece material and ensure the entry area is wet.
Start the cut with the tool aligned to the hole axis and keep the alignment stable through the first turns or revolutions.
Continue the pass while monitoring torque and remove the tool if chips accumulate and increase cutting resistance.
Retract the tool, clean chips from the flutes, and inspect the thread before the part moves to the next operation.

Phạm vi cung cấp

1 set, consisting of 2 chiếc, as stated in the product name

Đặc tính kỹ thuật

Type: Mũi taro ren tay (tạo ren trong)
Standard: DIN 2181
Thread system: ISO metric
Tool material: HSS-G
Surface finish: Ground
Tolerance class: ISO metric ren trong tolerance 6H

Câu hỏi thường gặp (FAQ)

What should you check before you start tapping with this tool? You verify the thread designation shown in the product name and confirm that your pre hole preparation meets your internal process specification. You also check the workpiece material and choose a Chất bôi trơn cắt gọt ren that prevents seizing. Which holder type do you typically use with this tap? You use a Tay quay taro that clamps the square drive securely and lets you keep the axis straight. In tight spaces you may also use a compact wrench as long as it supports stable guidance. How do you reduce the risk of broken taps and damaged threads? You keep the tool aligned, use a suitable Chất bôi trơn cắt gọt ren, and monitor torque so you can stop before overload. You also remove chips from the flutes and avoid starting on burrs or hard scale. Where can you find detailed guidance for manual tapping? Use the PDF for consolidated notes on selection and handling. Technical information Mũi taro ren tay (tạo ren trong) as PDF Do you need cutting Chất bôi trơn cắt gọt ren or coolant for this tap? Yes, you use a Chất bôi trơn cắt gọt ren or coolant matched to the workpiece material to reduce friction and to control heat. Stable lubrication also helps keep thread flank quality consistent. How do you maintain and store the tap after use? You clean chips from the flutes, dry the tool, and apply a light corrosion protection film. You store it so cutting edges are protected from contact and impact. Where can you find additional technical data and the full range? Use the catalog for overview tables and selection guidance. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric-fine ISO-thread
Tiêu chuẩn	DIN 2181
Vật liệu	HSS-G
Tolerance	ISO2 (6H)
Kích thước	M 7 x 0.5
Overall length (L1)	50 mm
Thread length (L2)	14 mm
Core hole diameter (D1)	6.5 mm
Shank diameter (D2)	6.0 mm
Drive connector	4.9 mm
EAN	4022835263197
Mã hàng	26319
Type of flute	straight fluted
Phạm vi ứng dụng	for through and blind holes
Chuẩn ren	DIN 13

Phụ kiện tùy chọn

SKU	Hình	Giá VNĐ	Tên sản phẩm & mô tả ngắn
26319-1		237.000	Mũi taro ren tay (tạo ren trong) Rougher DIN 2181 HSS-G - M 7 x 0.5 Mũi taro ren tay (tạo ren trong) Rougher DIN 2181 HSS-G - M 7 x 0.5 VÖLKEL, mã 26319-1, phù hợp cho gia công ren trong.
26319-2		237.000	Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 HSS-G - M 7 x 0.5 Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 HSS-G - M 7 x 0.5 VÖLKEL, mã 26319-2, phù hợp cho gia công ren trong.