The VÖLKEL Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 in M10x1.0 is your precise tool for cutting and restoring metric fine threads. Made of HSS-Git ensures clean surfaces, reliable tolerance ISO 2 (6H)and long tool life in unalloyed and low alloyed steels up to 900 N/mm². M10x1.0 is a standard size for many grease nipplesmaking this tap especially relevant in automotive and machinery maintenance worldwide.
This Mũi taro ren tay (tạo ren trong) finisher is designed for through and lỗ bít in fine threads. With its ground HSS geometry, it delivers smooth cutting and consistent results, even in challenging maintenance conditions.
1. Which materials can I use this tap on?
For unalloyed and low alloyed steels up to 900 N/mm². For stainless and harder alloys, use HSSE/HSSE-Co taps.
2. Why is M10x1.0 important in maintenance?
It is a standard fine thread for grease nipples in automotive, agricultural, and industrial machinery, making it vital for repair work.
3. What is the benefit of a finisher tap?
It cuts the final profile of the thread with high accuracy and surface quality, perfect for re-cutting and fine repairs.
4. How do I ensure alignment?
Keep the tap strictly perpendicular to the hole. Even small deviations can damage the thread profile.
5. Which lubrication is recommended?
Use cutting oil or paste for better performance and longer tool life.
6. How do I check the result?
Clean the thread and test with an M10x1.0 grease nipple, bolt, or thread gauge. It should fit smoothly without play.
Watch how fine threads are cut and maintained:
Do you have questions about using the Mũi taro ren tay (tạo ren trong) Finisher M10x1.0 or need advice on sửa ren for grease nipples? Our team is here to help! Contact us anytime through our biểu mẫu liên hệ.
| Loại ren | metric-fine ISO-thread |
|---|---|
| Tiêu chuẩn | DIN 2181 |
| Vật liệu | HSS-G |
| Tolerance | ISO2 (6H) |
| Kích thước | M 10 x 1.0 |
| Overall length (L1) | 63 mm |
| Thread length (L2) | 20 mm |
| Core hole diameter (D1) | 9.0 mm |
| Shank diameter (D2) | 7.0 mm |
| Drive connector | 5.5 mm |
| Mã hàng | 26336-2 |
| Type of flute | straight fluted |
| Phạm vi ứng dụng | for through and blind holes |
| Chuẩn ren | DIN 13 |
Hãy là người đầu tiên đánh giá “Mũi taro ren tay (tạo ren trong) Finisher DIN 2181 HSS-G - M 10 x 1.0”
