Bàn ren lục giác DIN 382 HSS - M 3 x 0.5 LH
You use this tool in threading related work where correct alignment and a matching standard are required in the designation M 3 x 0.5 LH.
Selection and handling depend on the interface and execution stated in the product name and on the workpiece material used in your process.
- Support common threading workflows in fabrication and maintenance settings depending on execution
- Use with matching holders and interfaces stated in the product name
- Clamp the die in a matching Bàn ren ngoài (tạo ren ngoài) holder or Tay quay bàn ren and keep the setup square to the workpiece axis
- Process: manual driving or assisted driving depending on your holder and machine setup
- Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
Lưu ý Select the variant that matches the thread standard, hand direction, and tolerance requirements stated in your drawing.
- Supports secure handling in threading related processes depending on execution
- Helps you keep alignment and consistent tool engagement
- Simple setup for workshop and maintenance operations
- Design supports repeatable results when used with a matching interface
Hạn chế
- Limited performance in very hard, abrasive, or heat treated materials depending on tool grade and coating
- Not suitable for high volume production where cycle time and tool life must be maximized
- Confirm the product execution stated in the product name
- Prepare the workplace and ensure the workpiece is secured
- Mount the tool in a suitable holder depending on execution
- Align the tool carefully before you start
- Use a suitable Chất bôi trơn cắt gọt ren if your process requires it
- Carry out the operation with steady control
- Clean the tool and protect it for storage
- Tool type: Tool
- Standard: DIN 382 HSS - M 3
- Material: HSS
- Thread system: Metric
- Hand direction: trái
- Tolerance: GO and NO GO limits per ISO 1502
- Thread designation: M 3 x 0.5 LH
- How do you confirm compatibility before use?
- Match the interface and execution stated in the product name to your tool and holder setup. If any parameter is unclear, verify it in your documentation before you start.
- What is a common setup check?
- Clean contact surfaces and ensure the tool is seated correctly. Stable clamping reduces alignment errors and uneven load.
- How do you maintain the product?
- Remove debris, wipe clean, and apply corrosion protection if needed. Storage conditions in workshops can strongly influence service life.
- When should you change the tool or accessory?
- Change it when clamping becomes unreliable, guidance is no longer precise, or visible damage appears. Continued use can compromise process stability.
- Where do you find selection information?
- Use the product name to match your drawing and then consult the relevant catalog for tables and execution notes.
- Where can you find additional technical information for this tool type?
- Use the technical information document for background on geometry terms, selection logic, and handling notes. Technical information Bàn ren lục giác as PDF
- What is a sensible inspection method after cutting?
- Use the inspection method defined in your quality plan and check fit and surface. If you see tearing or tight fit, review alignment, lubrication, and tool condition.
- Where can you find the full VÖLKEL catalog for selection support?
- Use the catalog for the complete range, execution variants, and reference tables. VD 23 catalog as PDF
Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.
