P.V.97 Bàn ren ngoài (tạo ren ngoài) (set of 7 pcs.) DIN standard HSS M 3 – M 12

• Use in workshop production, maintenance, and fabrication where the stated thread designation must be matched accurately.
• Select the tool by the thread system, size, and form stated in the product name before the job begins.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Support service workshops, toolrooms, plant maintenance, and general mechanical engineering work.

Lưu ý Confirm thread designation, holder concept, and workpiece condition before you start the operation.

• Several ren ngoài sizes are available in one organized set.
• Useful for thread restoration and new ren ngoài work.
• Set storage helps keep the die range complete and ready.
• Suitable for maintenance and fabrication work with recurring ren ngoài.

• ren ngoài quality still depends on correct alignment and a suitable holder setup.
• It is mainly a workshop assortment, not a full production threading cell solution.

1. Select the required die size from the set according to the specified ren ngoài.
2. Prepare the workpiece end so the die can start on a clean and square surface.
3. Mount the die in a suitable die holder and secure it before the cut begins.
4. Start the die square to the workpiece and apply steady torque during the cut.
5. Use Chất bôi trơn cắt gọt ren suited to the material and clear chips from the work area during the pass.
6. Inspect the thread and return the die to the set after cleaning.

• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 3 (27426)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 4 (27430)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 5 (27434)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 6 (27438)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 8 (27442)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 10 (27446)
• 1x HSS Bàn ren ngoài (tạo ren ngoài) M 12 (27450)

• Product type: Bàn ren ngoài (tạo ren ngoài) set
• Thread system: M
• Tool material: HSS
• Included groups: Bàn ren ngoài (tạo ren ngoài)

Match the thread designation, standard, and execution from the product name to the drawing or the existing mating thread before you start the job.

Check whether you need manual handling, assisted driving, or a controlled machine process, and confirm that the product type in the name matches that use case.

Inspect hole or workpiece condition, alignment, lubrication plan, and holder suitability so the tool can work under controlled conditions.

Technical information Bàn ren ngoài (tạo ren ngoài) as PDF

In many workshop situations, yes, provided the tool type, thread condition, and workpiece state support that use case.

VD 23 catalog as PDF

After size matching, the main checkpoint is whether the tool form and process type suit the workpiece material and the intended hole or ren ngoài condition.