V-COIL Dụng cụ lắp ren cấy (Drive connector 1/4") M 10 x 1.5

• for inserting a thread insert into a newly cut thread
• suitable for V-COIL and compatible Ren cấy V-COIL
• optimized for machine use with 1/4" drive
• ideal for maintenance, repair, and production work

• screw insert onto the Dụng cụ lắp ren cấy
• turn the insert into the thread in the correct direction
• install until the insert reaches the correct depth

1. Preparation: Ensure the newly tapped thread is clean and free from chips or debris.
2. Attach the insert: Screw the thread insert fully onto the V-COIL Dụng cụ lắp ren cấy for M 10 × 1.5.
3. Position tool: Align the tool with the tapped thread entrance.
4. Insert: Use machine drive (1/4" connection) to wind the insert clockwise into the thread to the correct installation depth.
5. Remove tool: Once the insert is fully seated, detach the Dụng cụ lắp ren cấy — the insert remains securely installed.

• Standard: Manufacturer standard
• Nominal size: M 10 × 1.5
• Drive connector: 1/4"
• Application size: M 10 × 1.5
• EAN: 4022835080961
• Item number: 08096

Which inserts are compatible with this tool?

The tool is designed for thread inserts sized M 10 × 1.5 and is compatible with standard V-COIL or other Ren cấy V-COIL of the same nominal size.

Can the tool be used manually?

It is primarily intended for machine use with a 1/4" drive. However, in guided manual setups it may be used manually if the alignment is maintained carefully.

Can this tool also remove old inserts?

No — this Dụng cụ lắp ren cấy is only designed for installing thread inserts. A separate removal tool is required to extract existing inserts.

• 1× V-COIL Dụng cụ lắp ren cấy, 1/4", M 10 × 1.5 (Item số 08096)