Trang chủ Cặp taro máy + mũi khoan Cặp mũi khoan taro HEXDRIVE M 5 x 0.8, DIN 371, Form C 15° RSP, HSS-E

Cặp taro máy + mũi khoan

Cặp mũi khoan taro HEXDRIVE M 5 x 0.8, DIN 371, Form C 15° RSP, HSS-E

★ 0.0 (0 đánh giá)

Đã bán: 0

Cặp mũi khoan taro HEXDRIVE M 5 x 0.8, DIN 371, Form C 15° RSP, HSS-E VÖLKEL, mã 37682, dùng cho gia công ren trong.

SKU: 37682

0 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Cặp mũi khoan taro HEXDRIVE M 5 x 0.8, DIN 371, Form C 15° RSP, HSS-E

With this TwinBox, you work with a coordinated tool pair for producing ren trong. The advantage lies in the clear workflow from drilling to cắt ren, because the drill and tap are already assigned together. For selection, you check the thread system, standard, form and the size stated in the product name.

For technical classification, read the product name from left to right: TwinBox designates the product group, M the metric thread system and DIN 371 the standard-related design of the tap. Form C 15° RSP identifies a right-hand spiral version for blind hole threads. HSS-E stands for the tool material, HexDrive for the hexagonal drive in the matching holder.

Ứng dụng

Suitable when the core hole and ren trong are to be prepared with assigned tools in a coordinated workflow.
M stands for a ren hệ mét ISO and makes selection easier in mechanical engineering, workshop use and maintenance.
Form C 15° RSP is typically chosen for blind hole threads and supports chip flow out of the hole.
Process: manual or assisted drive depending on your tool holder and machine configuration.
Use: cắt ren, re-cutting threads and cleaning threads depending on the condition of the thread.

Lưu ý VÖLKEL uses and recommends twist drills from LÖHER. LÖHER product catalogue as PDF

Advantages

Cặp mũi khoan taro TWINBOX
HexDrive supports quick tool changes and positive-fit power transmission in the matching holder.
DIN 371 makes the design easier to classify technically compared with other versions.
HSS-E is designed as a tool material for durable threading work in industrial environments.

Disadvantages

If your process is explicitly designed for through threads with a different chamfer form, Form C 15° RSP is not the first choice.
Before series production starts, the set does not replace checking the holder, lubrication and axis alignment.

Các bước thực hiện

First check the product name, thread system, standard and form so that the set matches the intended task.
Clamp the workpiece securely and align the machining position so that drilling and cắt ren can be carried out on the same axis.
Insert the Mũi khoan xoắn into the matching holder and ensure a smooth, controlled start.
Produce the core hole with even feed and then withdraw the drill cleanly from the hole.
Clean the prepared hole and remove residues from the holder and workpiece before using the second tool.
Change to the Mũi taro máy and check again that it is firmly seated in the HexDrive holder.
Guide the tap axially and cut the ren trong with controlled movement according to your machine or holder.
Turn the tool out cleanly, remove residues and then check the thread for an even profile.

Scope of delivery

1 chiếc Mũi taro máy HexDrive DIN 371 Form C 15° RSP, HSS-E, M 5 x 0.8
1 chiếc Mũi khoan xoắn chuôi lục giác 4.2 mm

Đặc tính kỹ thuật

Product type: Set consisting of Mũi taro máy and Mũi khoan xoắn
Product group: TwinBox
Holder: HexDrive
Standard: DIN 371
Form: Form C 15° RSP
Tap material: HSS-E
Thread system: M metric
Thread size: M 5 x 0.8
Drill in set: Mũi khoan xoắn chuôi lục giác 4.2 mm

Câu hỏi thường gặp (FAQ)

What do you use a TwinBox for in the workflow? You use it when the core hole and cắt ren are to be prepared with matched tools and both tools should be available together. What does M mean on this product? M stands for a ren hệ mét ISO. This makes systematic thread identification easier for selection and replacement purchasing. What role does DIN 371 play? DIN 371 is the standard reference for the design of the Mũi taro máy. This allows you to classify the version technically in a comparable way. How do you classify Form C 15° RSP? Form C 15° RSP identifies a right-hand spiral design that is typically used for blind hole threads. This clearly distinguishes the set from use on through threads. What does HSS-E describe in this set? HSS-E designates the tool material of the Mũi taro máy. Conceptually, this version stands for increased hot hardness and durable use in the threading process. Why is HexDrive important for the application? HexDrive describes the hexagonal holder interface. It is useful when your holder is designed for positive-fit power transmission and quick changes in the workflow. Why is the Mũi khoan xoắn included in the TwinBox? The Mũi khoan xoắn is assigned to the tap as the preparatory tool. This keeps the process from core hole to finished ren trong organized in one clear tool combination. Where can you find more information about VÖLKEL threading tools? Further information and suitable products can be found in the VD 23 catalogue as PDF.

Do you need support with selection or application?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	Ren hệ mét ISO DIN 13
Tiêu chuẩn	DIN 371
Form	Form C
Vật liệu	HSS-E
Tolerance	ISO 2 /6H
Kích thước	M 5 x 0.8
EAN	4022835376828
Mã hàng	37682