The V-COIL Dụng cụ lắp ren cấy UNC 1/4 enables fast, controlled, and reliable installation of Ren cấy V-COIL. Thanks to the 1/4" square drive connector, it can be used with a ratchet, cordless screwdriver, or torque wrench – ideal for workshops, assembly, and industrial applications.
Installation steps:
1. Which thread type is this tool suitable for?
This tool is specifically designed for Ren cấy V-COIL size UNC 1/4.
2. Can I use the tool with a cordless screwdriver?
Yes, but only at low speed. For maximum precision, a ratchet or torque wrench is recommended.
3. What if the insert is difficult to screw onto the tool?
Usually the wire insert is slightly deformed. Replace it with a new one.
4. How do I know if the insert is correctly positioned?
The insert must engage cleanly with the driver and screw on evenly without tilting.
5. Is the tool suitable for deep installation areas?
Yes, as long as the Ren cấy V-COIL has the appropriate length.
6. Can I use this UNC 1/4 tool with metric inserts?
No, UNC and metric inserts differ in pitch and geometry.
7. How should I maintain the tool?
Clean after use, lightly oil, and store in a dry place to prevent corrosion.
8. What if the insert is installed crooked?
Remove the tool, discard the insert, and restart with proper thread preparation.
Questions or need an offer?
Use the biểu mẫu liên hệ.
| Tiêu chuẩn | Works Standard |
|---|---|
| Kích thước | UNC 1/4 |
| Drive connector | 1/4" |
| EAN | 4022835081951 |
| Mã hàng | 08195 |
| Phạm vi ứng dụng | UNC 1/4 |
| SKU | Hình | Giá VNĐ | Tên sản phẩm & mô tả ngắn | |
|---|---|---|---|---|
| 04107 |
|
819.200
|
Bộ sửa ren, UNC 1/4 - 1,5D
Bộ sửa ren, UNC 1/4 - 1,5D VÖLKEL, mã 04107, phù hợp cho sửa ren và lắp ren cấy.
|
|
| 04184 |
|
6.230.400
|
Thread Repair Bộ sửa ren UNC 1/4 – UNC 1/2
Thread Repair Bộ sửa ren UNC 1/4 – UNC 1/2 VÖLKEL, mã 04184, phù hợp cho sửa ren và lắp ren cấy.
|
Hãy là người đầu tiên đánh giá “V-COIL Dụng cụ lắp ren cấy (Drive connector 1/4") UNC 1/4”
