The V-COIL Dụng cụ lắp ren cấy M 14 × 1.5 enables fast, controlled, and reliable installation of thread inserts. Thanks to its 1/4" square drive connector, it can be used with ratchets, cordless drivers, or torque wrenches – ideal for workshops, assembly, and industrial applications.
How to proceed during installation:
1. Does this tool also fit other thread pitches?
No, this tool is specifically designed for pitch 1.5. For 1.25 a separate tool is required.
2. Can I use this tool with a cordless drill?
Yes, at low speed. However, using a ratchet or torque wrench is more precise.
3. What if the insert slips during installation?
This usually means the insert is not properly seated on the driving tang. Simply reposition and attach it correctly.
4. Can I use damaged or bent inserts?
số Damaged inserts can destroy the core thread or be installed crooked. Always replace them.
5. How do I avoid crooked installation?
Align the tool perfectly straight and ensure the cut thread is clean before installation.
6. Is the tool suitable for hard materials?
Yes, as long as the core hole is properly prepared.
7. How do I maintain the tool?
Clean after use, oil lightly, and store in a dry place.
8. What installation depth is possible?
The installation depth corresponds to the length of the chosen thread insert – standard and long versions are possible.
Any questions or need a quotation?
Use the biểu mẫu liên hệ.
| Tiêu chuẩn | Works Standard |
|---|---|
| Kích thước | M 14 x 1,5 |
| Drive connector | 1/4" |
| EAN | 4022835081944 |
| Mã hàng | 08194 |
| Phạm vi ứng dụng | M 14 x 1,5 |
Hãy là người đầu tiên đánh giá “V-COIL Dụng cụ lắp ren cấy (Drive connector 1/4") M 14 x 1,5”
