Trang chủ Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0

Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0

Name: Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0
Brand: VOLKEL
SKU: 56229
Price: 1332000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0 VÖLKEL, mã 56229, phù hợp cho gia công ren ngoài.

SKU: 56229

1.332.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0

Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0 supports controlled cắt ren when you select it by thread system and apply it in a stable, guided setup. It fits typical shop workflows in machine building, service, and metal fabrication.

M denotes an ISO metric thread, common in mechanical engineering where metric drawings and tolerances are used. DIN 223 / DIN EN 22568 indicates the referenced standard family or tool standard named in the product designation.

Ứng dụng

Bàn ren ngoài (tạo ren ngoài) use in repair and small batch work, including service workshops and mechanical engineering.
Thread production on prepared holes or blanks where alignment is controlled by a holder, guide, or machine spindle.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
Use suitable lubrication and remove chips regularly so cutting edges do not pack up.
Thread system context: match the tool to the M specification stated on the part or drawing.

Lưu ý Clean threads and tools before use, apply suitable lubrication for cutting operations, and stop if resistance rises sharply.

Lợi ích

Direct selection by thread designation such as M when stated reduces setup mistakes.
Suitable for workshop processes where alignment and controlled engagement are practical priorities.
Supports consistent thread quality when you use steady feed and lubrication.
Works well for maintenance tasks where parts must be reworked to the drawing requirement.

Hạn chế

Not suitable for materials or hardness outside the typical range for the named tool material and execution.
Not intended for high performance production without a validated process and rigid machine conditions.

Các bước thực hiện

Inspect the blank and remove burrs so the die can start square to the axis.
Mount the die in a suitable die holder and secure it so it cannot tilt under load.
Align the holder to the workpiece axis and apply suitable cutting Chất bôi trơn cắt gọt ren.
Start the thread with steady rotation and maintain axial alignment without side force.
Reverse briefly to clear chips from the cutting edges, then continue with steady feed.
Continue until required engagement is reached, then back the die off fully.
Clean the thread and the die, then protect the tool from corrosion before storage.

Phạm vi cung cấp

1 chiếc Bàn ren ngoài (tạo ren ngoài) cho đồng DIN 223 (DIN EN 22568) HSS - M 12 x 1.0

Đặc tính kỹ thuật

Product type: Bàn ren ngoài (tạo ren ngoài)
Standard: DIN 223 / DIN EN 22568
Thread designation: M
Tool material or execution: HSS

Câu hỏi thường gặp (FAQ)

How do you decide between a Mũi taro ren tay (tạo ren trong) and a Mũi taro máy for this thread? You choose by the driving method and the stability of the setup. Mũi taro ren tay (tạo ren trong) support controlled manual work, while machine taps support guided or powered driving with stable alignment. Where do you find technical notes for Bàn ren ngoài (tạo ren ngoài)? This document covers setup, alignment, and use of Bàn ren ngoài (tạo ren ngoài): Technical information Bàn ren ngoài (tạo ren ngoài) as PDF What do you check before you start cutting the thread? Confirm the thread designation, the hole preparation, and the workpiece material. Keep alignment square to the axis and plan lubrication and chip evacuation. How do you reduce the risk of a tapered or oversize thread? Maintain alignment, avoid side load, and use steady feed. Clean chips from the cutting geometry and verify the first part against the specification. Where do you find the matching catalog for additional variants and reference data? Use the catalog for additional information and product family context: VD 23 catalog as PDF How do you choose the correct drill preparation without guessing values? Use a drill size chart that matches the thread system and the tool type. For inch based threads, confirm that the notation is interpreted correctly before drilling.

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric-fine ISO-thread
Tiêu chuẩn	DIN 223 (DIN EN 22568)
Form	solid version (Form B) for brass
Vật liệu	HSS
Tolerance	6g
Kích thước	M 12 x 1.0
Outer diameter	38.0 mm
EAN	4022835562290
Mã hàng	56229
Chuẩn ren	DIN 13
Rec. Bolt diameter	11.88 mm