Home Round Die DIN 223 (DIN EN 22568) HSS - M 24 x 0.75

Round Die DIN 223 (DIN EN 22568) HSS - M 24 x 0.75

Name: Round Die DIN 223 (DIN EN 22568) HSS - M 24 x 0.75
Brand: VOLKEL
SKU: 26603
Price: 2037000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Round Die DIN 223 (DIN EN 22568) HSS - M 24 x 0.75 by VÖLKEL, item no. 26603, suitable for cutting external threads.

SKU: 26603

2.037.000 đ

Price includes VAT

Description

Round Die DIN 223 (DIN EN 22568) HSS - M 24 x 0.75

You produce external threads in workshop operations with a round die. It is a compact option for service work and prototyping where you need repeatable manual control.

Select the die by the thread designation and standard stated in the product name, then use a suitable die holder to keep the tool square. Use cutting fluid matched to your material and clear chips to protect the thread profile.

Application

Cut external threads on rods, bolts, and studs in repair, prototyping, and small batch work.
Use with a round die holder or die stock to keep the die square to the workpiece axis.
Apply cutting fluid matched to your material to reduce friction and protect the thread profile.
Process: manual driving or assisted driving depending on your holder and machine setup.
Use: thread cutting, re tapping, and thread cleaning depending on condition.

Note Confirm thread system, pitch, and fit requirement before cutting. Prepare the workpiece with a clean lead in chamfer.

Benefits

Practical for workshop thread cutting without dedicated thread rolling equipment.
Direct feedback on cutting load during manual use.
Simple setup with standard die holders.
Enables maintenance work on damaged external threads.

Drawbacks

Performance is limited in very hard or abrasive materials unless a suitable die execution is selected.
Cycle time is limited for high volume production compared with dedicated machine processes.

Step by step

Inspect the workpiece and ensure there is a clean lead in chamfer at the thread start.
Select a round die holder and clamp the die securely before you approach the workpiece.
Apply cutting fluid to the workpiece area and to the die entry side.
Align the die square to the workpiece axis and start cutting with steady forward pressure.
Turn the die forward to advance the thread while maintaining alignment.
Reverse briefly at intervals to clear chips from the cutting edges.
Continue until the required thread length is reached and then stop the forward feed.
Back the die off the workpiece and remove it from the holder.
Clean the die and verify the thread fit with a matching part or a suitable gauge.

Scope of supply

1 piece: tool as specified by the product name

Technical features

Product type: Round die
Standard: DIN EN 22568; DIN 223
Thread designation: M 24 x 0.75
Thread system: Metric ISO
Tool material: HSS

Frequently asked questions (FAQ)

How do you select the correct die for your thread? Match the thread designation in the product name to your required external thread and ensure the mating nut or component uses the same system and pitch. Which holder should you use for a round die? Use a round die holder or die stock that clamps the die securely and supports square alignment to the workpiece axis. Which workpiece preparation is important before cutting an external thread? Prepare a clean lead in chamfer and ensure the workpiece surface is free of scale and burrs so the die can start square and cut cleanly. How do you manage chips during external thread cutting? Use suitable cutting fluid and clear chips regularly during the operation so chips do not score the new thread surface. Where can you find additional technical information on round dies? Use this PDF for background, setup notes, and general guidance: Technical information round dies as PDF How do you store and protect a round die after use? Clean the die, remove cutting residue, and apply a light corrosion protection film before storage in a dry container. Where can you find more VÖLKEL threading tool information for selection and application? Use this catalog for product range and selection help: VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	metric-fine ISO-thread
Standard	DIN 223 (DIN EN 22568)
Form	solid version (Form B)
Material	HSS
Tolerance	6g
Size	M 24 x 0.75
Outer diameter	55.0 mm
EAN	4022835266037
Item number	26603
Thread standard	DIN 13
Rec. Bolt diameter	23.90 mm