Home Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12

Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12

Name: Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12
Brand: VOLKEL
SKU: 24438
Price: 1582000.0 VND
Availability: OutOfStock

★ 0.0 (0 reviews)

Sold: 0

Imported from: Germany

Origin: Made in Germany

Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12 by VÖLKEL, item no. 24438, suitable for cutting external threads.

SKU: 24438

1.582.000 đ

Price includes VAT

Description

Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12

You use Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12 to generate threads during manufacturing, maintenance, or repair work. Correct results depend on matching the tool to the specified thread designation and keeping the tool aligned to the axis.

UNF means Unified National Fine, an inch based fine thread series used where higher thread engagement is specified. DIN 223 / DIN EN 22568 indicates the referenced standard family or tool standard named in the product designation.

Application

Round Die use in repair and small batch work, including service workshops and mechanical engineering.
Thread production on prepared holes or blanks where alignment is controlled by a holder, guide, or machine spindle.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: thread cutting, re tapping, and thread cleaning depending on condition
Use suitable lubrication and remove chips regularly so cutting edges do not pack up.
Thread system context: match the tool to the UNF specification stated on the part or drawing.

Note Clean threads and tools before use, apply suitable lubrication for cutting operations, and stop if resistance rises sharply.

Benefits

Direct selection by thread designation such as UNF when stated reduces setup mistakes.
Suitable for workshop processes where alignment and controlled engagement are practical priorities.
Supports consistent thread quality when you use steady feed and lubrication.
Works well for maintenance tasks where parts must be reworked to the drawing requirement.

Drawbacks

Not suitable for materials or hardness outside the typical range for the named tool material and execution.
Not intended for high performance production without a validated process and rigid machine conditions.

Step by step

Inspect the blank and remove burrs so the die can start square to the axis.
Mount the die in a suitable die holder and secure it so it cannot tilt under load.
Align the holder to the workpiece axis and apply suitable cutting lubricant.
Start the thread with steady rotation and maintain axial alignment without side force.
Reverse briefly to clear chips from the cutting edges, then continue with steady feed.
Continue until required engagement is reached, then back the die off fully.
Clean the thread and the die, then protect the tool from corrosion before storage.

Scope of supply

1 piece Round Die DIN 223 (DIN EN 22568) HSS - UNF 1" x 12

Technical features

Product type: Round Die
Standard: DIN 223 / DIN EN 22568
Thread designation: UNF
Tool material or execution: HSS

Frequently asked questions (FAQ)

How do you decide between a hand tap and a machine tap for this thread? You choose by the driving method and the stability of the setup. Hand taps support controlled manual work, while machine taps support guided or powered driving with stable alignment. Where do you find technical notes for round dies? This document covers setup, alignment, and use of round dies: Technical information round dies as PDF What do you check before you start cutting the thread? Confirm the thread designation, the hole preparation, and the workpiece material. Keep alignment square to the axis and plan lubrication and chip evacuation. How do you translate inch based thread notation to metric workshop references? Use this conversion table for fast unit assignment in daily work: Inch to mm conversion table as PDF How do you reduce the risk of a tapered or oversize thread? Maintain alignment, avoid side load, and use steady feed. Clean chips from the cutting geometry and verify the first part against the specification. Where do you find the matching catalog for additional variants and reference data? Use the catalog for additional information and product family context: VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the contact form.

Specifications

Type of thread	Unified Fine Thread
Standard	DIN 223 (DIN EN 22568)
Form	solid version (Form B)
Material	HSS
Tolerance	2A
Size	UNF 1" x 12
Outer diameter	55.0 mm
EAN	4022835244387
Item number	24438
Thread standard	ANSI B1.1
Rec. Bolt diameter	25.21 mm