Trang chủ Mũi taro ren Mũi taro ren tay (tạo ren trong) Taper ISO 529 Form A HSS-G - M 6 x 1.0

Mũi taro ren

Mũi taro ren tay (tạo ren trong) Taper ISO 529 Form A HSS-G - M 6 x 1.0

Name: Mũi taro ren tay (tạo ren trong) Taper ISO 529 Form A HSS-G - M 6 x 1.0
Brand: VOLKEL
SKU: 80438-1
Price: 119000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi taro ren tay (tạo ren trong) Taper ISO 529 Form A HSS-G - M 6 x 1.0 VÖLKEL, mã 80438-1, phù hợp cho gia công ren trong.

SKU: 80438-1

119.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi taro ren tay (tạo ren trong) Taper ISO 529 Form A HSS-G - M 6 x 1.0

You use this Mũi taro ren tay (tạo ren trong) to cut ren trong where controlled manual feedback matters. The cutting geometry follows the execution stated in the product name so you can match it to your thread system and the hole condition.

Thread quality depends on straight guidance, consistent torque, and correct preparation of the pre hole. In production environments you also standardise lubrication and inspection to keep scrap rates low.

Ứng dụng

Cutting of ren trong in steels and common engineering materials within the limits of the chosen execution
Use for series work, repair tasks, and general machining in mechanical engineering and metal fabrication
Suitable for lỗ thông and lỗ bít depending on the geometry stated in the product name
Use with a suitable Tay quay taro to guide the tool straight and to control torque by hand
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Keep the tool clean and lightly oiled after use to prevent corrosion and to protect cutting edges.

Lợi ích

Defined cutting geometry supports predictable thread form
Clear variant identification via standard and form in the product name
Suitable for workshop and series processes when lubrication and alignment are controlled
Supports rework and maintenance tasks without changing the workpiece design

Hạn chế

Tool life can drop in very hard or abrasive materials if the selected execution is not matched to the application
Not suitable for high performance applications when process parameters are not optimised

Các bước thực hiện

Confirm the thread designation, standard, and execution in the product name against your drawing and material specification.
Prepare the pre hole and entry chamfer according to your process specification and remove burrs from the opening.
Mount the tap in a suitable Tay quay taro and secure the clamping so the tool cannot slip under load.
Apply a suitable cutting Chất bôi trơn cắt gọt ren or coolant for the workpiece material and ensure the entry area is wet.
Start the cut with the tool aligned to the hole axis and keep the alignment stable through the first turns or revolutions.
Continue the pass while monitoring torque and remove the tool if chips accumulate and increase cutting resistance.
Retract the tool, clean chips from the flutes, and inspect the thread before the part moves to the next operation.

Phạm vi cung cấp

Scope of supply is not specified in the provided data.

Đặc tính kỹ thuật

Type: Mũi taro ren tay (tạo ren trong)
Standard: ISO 529
Thread system: ISO metric
Execution: Form A
Lead type: Taper
Tool material: HSS-G
Surface finish: Ground
Tolerance class: ISO metric ren trong tolerance 6H

Câu hỏi thường gặp (FAQ)

How do you choose the correct variant for your thread and workpiece? You match the thread designation, standard, and geometry in the product name to your drawing and hole type. You also consider the workpiece material and whether the hole is through or blind, because these factors influence chip transport and torque. Which holder type do you typically use with this tap? You use a Tay quay taro that clamps the square drive securely and lets you keep the axis straight. In tight spaces you may also use a compact wrench as long as it supports stable guidance. How do you reduce the risk of broken taps and damaged threads? You keep the tool aligned, use a suitable Chất bôi trơn cắt gọt ren, and monitor torque so you can stop before overload. You also remove chips from the flutes and avoid starting on burrs or hard scale. Where can you find detailed guidance for manual tapping? Use the PDF for consolidated notes on selection and handling. Technical information Mũi taro ren tay (tạo ren trong) as PDF Do you need cutting Chất bôi trơn cắt gọt ren or coolant for this tap? Yes, you use a Chất bôi trơn cắt gọt ren or coolant matched to the workpiece material to reduce friction and to control heat. Stable lubrication also helps keep thread flank quality consistent. How do you maintain and store the tap after use? You clean chips from the flutes, dry the tool, and apply a light corrosion protection film. You store it so cutting edges are protected from contact and impact. Where can you find additional technical data and the full range? Use the catalog for overview tables and selection guidance. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric ISO-thread
Tiêu chuẩn	ISO 529
Form	Form A
Vật liệu	HSS-G
Tolerance	ISO2 (6H)
Kích thước	M 6 x 1.0
Overall length (L1)	66 mm
Thread length (L2)	19 mm
Core hole diameter (D1)	5.0 mm
Shank diameter (D2)	6.3 mm
Drive connector	5.0 mm
Mã hàng	80438-1
Type of flute	straight fluted
Phạm vi ứng dụng	for through holes
Chuẩn ren	DIN 13