Trang chủ Mũi taro ren HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - UN 1.3/8 x 8

Mũi taro ren

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - UN 1.3/8 x 8

Name: HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - UN 1.3/8 x 8
Brand: VOLKEL
SKU: 67904
Price: 4965000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - UN 1.3/8 x 8 VÖLKEL, mã 67904, phù hợp cho gia công ren trong.

SKU: 67904

4.965.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

HexTap Type DS - Double ended tap, Multi-Drive Form C HSS-G - UN 1.3/8 x 8

Use this HexTap Type DS for fixture making and on site repair when you need to produce or refresh UN ren trong in prepared holes.

Form C chamfer and HSS-G execution give you predictable entry and cutting behavior, and the Multi-Drive interface supports workshop style driving methods.

Ứng dụng

Create UN ren trong on housings, jigs, and adapters after drilling operations.
Re tap threads that show tight running due to coating, dirt, or small burrs.
Prepare threads for bolted joints in equipment builds and retrofits.
Use where you need a robust, portable threading tool for on site interventions.

Lưu ý Use stable workholding and apply cutting fluid consistently to reduce friction and heat during cắt ren.

Lợi ích

Supports UN ren trong production and correction without switching tools repeatedly.
Multi-Drive interface helps you work with limited swing radius.
Form C chamfer supports predictable lead in behavior.
HSS-G material supports wear resistance in common steels and alloys.
Practical for on site work where a full tap set is not available.

Hạn chế

Not suitable for brittle materials that tend to chip at the thread entrance without careful setup.
Not intended for continuous industrial tapping lines where cycle time dominates.

Các bước thực hiện

Confirm the UN thread requirement before you set up the tool.
Deburr the hole entrance to support stable lead in.
Fix the component securely in a stable position.
Use a Multi-Drive holder that supports straight guidance. Technical information HexTap DS as PDF
Wet the cutting edges with suitable cutting fluid.
Start cutting with smooth rotation while keeping the axis aligned.
Cut the thread while preventing chip packing through regular clearing.
Verify engagement and surface finish after cleaning.

Phạm vi cung cấp

HexTap Type DS double ended tap in the selected UN size and execution.

Đặc tính kỹ thuật

size: UN 1.3/8 x 8
Thread type: UN ren trong
Tool type: HexTap Type DS double ended tap
Chamfer: Form C chamfer
Tool material: HSS-G
Drive interface: Multi-Drive interface
Công dụng: cắt ren, taro lại ren, and làm sạch ren depending on condition
Quy trình: manual driving or assisted driving depending on your holder and machine setup

Câu hỏi thường gặp (FAQ)

What does UN 1.3/8 x 8 mean on the product name? It identifies the UN thread size and the pitch in threads per inch as written on the tool. Match it to the mating fastener or drawing, and avoid mixing similar UN sizes. What is the practical advantage of the two working ends? Two ends can reduce tool changes during rework. Choose the working end that supports the desired starting behavior and thread quality, depending on execution. How do you reduce the risk of drive slip with Multi-Drive? Use a driver that fully engages and keep the interface clean. Apply torque smoothly to avoid shock loads. How does chamfer Form C influence starting behavior? It affects the lead in length and the way the tap enters the material. Use careful alignment at the first turns regardless of chamfer form. How do you protect tool life in tougher materials? Use suitable cutting fluid and keep alignment correct to avoid edge chipping. If cutting forces are high, review hole preparation and tool choice. Is làm sạch ren the same as sửa ren? làm sạch ren removes contamination and corrects small deformations. sửa ren rebuilds the thread with an insert when the original profile is no longer usable. Where can you find more technical data and selection guidance? For additional specifications and application guidance, see the VÖLKEL catalog. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	Unified thread
Tiêu chuẩn	Works Standard
Form	Form C
Vật liệu	HSS-G
Tolerance	2B
Kích thước	UN 1.3/8 x 8
Overall length (L1)	100 mm
Thread length (L2)	29 mm
Core hole diameter (D1)	31.75 mm
Width across flat (SW1)	mm mm
Width across flat (SW2)	mm mm
EAN	4022835679042
Mã hàng	67904
Type of flute	straight fluted
Phạm vi ứng dụng	for through and blind holes
Chuẩn ren	ANSI B 1.1