Trang chủ Mũi taro ren Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0

Mũi taro ren

Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0

Name: Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0
Brand: VOLKEL
SKU: 39806
Price: 1864000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0 VÖLKEL, mã 39806, phù hợp cho gia công ren trong.

SKU: 39806

1.864.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0

This tool is used to cut an ren trong in a drilled hole when you need repeatable form and fit. A Mũi taro máy is used when you need repeatable threads in series production.

Tool alignment at the start influences thread straightness, torque, and final fit. M indicates an ISO metric thread, where you match nominal size and pitch to the mating thread. HSSE indicates cobalt alloyed high speed thép, commonly selected for tougher materials and stable cutting performance.

Ứng dụng

Cut ren trong in drilled holes for fasteners, fittings, and mechanical assemblies.
Use in mechanical engineering, metal fabrication, and maintenance work where controlled threading is required.
Start the tap square to the hole to reduce risk of cross starting and uneven flank load.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý For consistent results, deburr the entry and keep the cutting area clean during use.

Lợi ích

Controlled ren trong cutting with direct process feedback
Suitable for repair work, prototyping, and general workshop machining
Supports repeatable thread fit when the pre hole and alignment are correct
Applicable across maintenance and production environments

Hạn chế

Not suitable for brittle or abrasive materials without adapted cutting strategy and tool choice.
Manual or guided threading can be slow for high throughput applications.

Các bước thực hiện

Prepare the hole with a correct core diameter and a clean entry chamfer.
Secure the workpiece and align the tool square to the hole axis.
Apply suitable cutting Chất bôi trơn cắt gọt ren for the material and process.
Start the tool with controlled torque until it is guided by the thread form.
Advance with steady turns or a guided feed while keeping alignment constant.
Withdraw the tool at intervals and clear chips from the flutes.
Continue until the required thread depth is reached, then remove the tool fully.
Clean the thread and check fit with a matching screw or gauge.

Phạm vi cung cấp

1 chiếc Mũi taro máy DIN 374 Form C 35° Spiral Flute HSSE - M 17 x 1.0

Đặc tính kỹ thuật

Tool type: Mũi taro máy
Flute concept: Spiral flute
Reference standard: DIN 374
Thread system: ISO metric
Material or coating: HSSE

Câu hỏi thường gặp (FAQ)

How do you confirm that the thread system matches the mating part? Match the designation on the tool to the drawing and the mating fastener or gauge. For inch and pipe threads, confirm thread family and fit class before you start machining. What does the designation M 17 x 1.0 mean on this tool? It defines the thread family and size that the tool is designed to produce or inspect. Use it only on matching parts and avoid mixing similar inch series. Where can you find additional technical information for this tool type? Use this document for further selection and application notes. Technical information machine taps as PDF When is a spiral flute tap typically used? Spiral flute taps tend to pull chips out of the hole and are commonly used for lỗ bít. Choose stable guidance and lubrication to keep torque predictable. How do the material and coating designations affect selection? These designations describe tool material and surface treatment. Use them to match wear resistance and toughness needs to your material and process, without changing thread geometry. Where can you find catalog information for this product family? Use the product catalog for overview tables and selection context. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric-fine ISO-thread
Tiêu chuẩn	DIN 374
Form	Form C
Vật liệu	HSSE
Tolerance	ISO2 (6H)
Kích thước	M 17 x 1.0
Overall length (L1)	110 mm
Thread length (L2)	13 mm
Core hole diameter (D1)	16.0 mm
Shank diameter (D2)	14.0 mm
Drive connector	11.0 mm
EAN	4022835398066
Mã hàng	39806
Type of flute	35° Spiral Flute
Phạm vi ứng dụng	for blind holes
Chuẩn ren	DIN 13