STI Mũi taro máy ngắn ISO 529 Form D HSS-G - G (BSP) 5/8 x 14

• Produce internal or ren ngoài as specified by the tool type in the product name.
• Use in machining, maintenance, and fabrication workflows where controlled thread production is required.
• Select by thread designation as stated in the product name: G (BSP) 5/8 x 14.
• Thread system reference: BSP.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Use lubrication suited to the work material and keep the working area clean for stable results.
• Inspect the produced thread with an appropriate method when the application is safety relevant.

Lưu ý Maintain cleanliness and avoid impact loads. Store the product protected and dry.

• Supports repeatable thread production in machining processes
• Suitable for series work with controlled alignment and lubrication
• Helps maintain thread quality when process parameters are stable
• Practical for production and maintenance machining

• Requires stable setup and suitable chip evacuation for the tap design
• Not intended for aggressive high speed use without validated cutting data

1. Prepare the workpiece correctly, including core hole or lead in preparation as required.
2. Apply lubrication suitable for the work material and process.
3. Mount the tool in a suitable holder or wrench and ensure straight alignment.
4. Start the thread carefully and maintain stable guidance during engagement.
5. Remove chips and debris as needed so cutting edges remain free.
6. Stop if resistance increases unexpectedly and check alignment and lubrication.
7. After threading, clean the thread and protect the tool for storage.

No scope of supply details are included in the available product data for this item.

• Product class: Threading tools
• Tool type: Mũi taro máy
• Thread system: BSP
• Designation: G (BSP) 5/8 x 14
• Standard: ISO 529
• Execution: Form D
• Material: HSS
• Surface finish: HSS-G

How do you choose the correct tool variant?
Match the thread system, designation, and execution stated in the product name to your drawing requirement and work material. Select the correct tool type for manual or machine use.

Which holder or wrench do you typically need?
Mũi taro ren tay (tạo ren trong) typically use a Tay quay taro. Dies typically use a die holder. Machine taps use a suitable machine holder with controlled alignment. Confirm details by the execution stated in the product name.

How do you reduce the risk of tool breakage?
Use correct preparation, stable alignment, suitable lubrication, and controlled torque. Stop if resistance rises unexpectedly and remove chips and debris as required.

How do you maintain thread quality in practice?
Keep preparation consistent, align the tool straight, use lubrication suited to the material, and verify threads with an inspection method appropriate for the application.

Where can you find technical information for short machine taps?
Use this PDF for selection and process notes: Technical information short machine taps as PDF

What limitations should you consider?
Threading results depend on material condition, preparation, lubrication, and setup stability. Validate the process for demanding applications and high performance requirements.

Where can you find additional information in the VÖLKEL threading tools catalog?
Use the catalog for overview information and selection guidance: VD 23 catalog as PDF