STI Mũi taro ren tay (tạo ren trong) ISO 529 HSS-G - M 39 x 4.0

• Cutting or reworking ren trong when controlled hand guidance is preferred
• Starting the tap carefully so the tool tracks on axis and follows the intended thread direction
• Using the tool in maintenance, fixture work and smaller batch production where direct feel is valuable
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Select the product by thread designation, workpiece condition and the holder concept used in your process.

• Thread related geometry and designation are clearly assigned in the product name for practical selection
• Suitable for workshop, maintenance and machine room workflows with repeatable tool use
• The explicit standard and material markings support controlled tool assignment in professional use
• A dedicated threading tool reduces compromise compared with improvised general purpose tooling

• Tool selection still depends on matching the thread system, material and process type to the actual job.
• It is intended for defined threading work and not for undirected high speed use without the correct setup and lubrication strategy.

1. Prepare the hole and fit the STI Mũi taro ren tay (tạo ren trong) into a suitable tap holder.
2. Position the tap square to the bore and start the thread carefully by hand guidance.
3. Continue the cut with controlled turning while keeping the tool aligned.
4. Reverse the tap as needed to clear the cutting path and maintain smooth running.
5. Remove the tool after the receiving thread is complete and clean the bore.
6. Check the prepared thread before installing the wire insert.

• 1 chiếc STI Mũi taro ren tay (tạo ren trong) ISO 529 HSS-G - M 39 x 4.0

• Product type: STI Mũi taro ren tay (tạo ren trong)
• Thread system: Metric ISO
• Standard: ISO 529
• Tool material or finish: HSS-G

What do you use STI Mũi taro ren tay (tạo ren trong) ISO 529 HSS-G - M 39 x 4.0 for?

You use this product for a defined threading step such as ren trong cutting, ren ngoài cutting, hole preparation or controlled tool handling depending on the product type.

Có thể xem thêm thông tin kỹ thuật ở đâu?

For additional technical background, see Technical information Mũi taro ren tay (tạo ren trong) as PDF.

When is hand guidance useful?

Hand guidance is useful when you want close control during thread entry, rework or maintenance work on individual parts and smaller series.

Có thể xem thêm tài liệu kỹ thuật liên quan ở đâu?

For a second related reference, see Inch to mm conversion table as PDF.

What does the Metric ISO designation mean?

M denotes the ISO metric thread system used widely in mechanical engineering, maintenance and general fastener work where metric screw threads are standard.

Có thể xem mục catalog của nhóm sản phẩm này ở đâu?

For catalog level orientation, see VD 23 catalog as PDF.

What should you check after the operation?

Check the thread entry, running behavior and general fit with the mating part or the next process step before releasing the workpiece.

How do you protect tool life in daily use?

Use stable alignment, suitable lubrication and a holder concept that matches the torque and guidance demands of the product.