Hotline: 098 484 7029 Email: [email protected]
เครื่องมือใส่สลักเกลียว V-COIL

V-COIL Extracting Tool số 3

★ 0.0 (0 รีวิว)
ขายแล้ว: 0
ยอดดู: 0
นำเข้าจาก: เยอรมนี
แหล่งกำเนิด: เยอรมนี

V-COIL Extracting Tool số 3 VÖLKEL, mã 07053, phù hợp cho sửa ren và lắp ren cấy.

SKU: 07053
€26.41
สถานะสต็อก: สั่งจอง 4-8 สัปดาห์
ราคาอ้างอิง
รายละเอียด

V-COIL Extracting Tool số 3

Use this sửa ren item when you need to restore ren trong with a wire insert system. The product name indicates the relevant system reference for selection.

Use controlled torque and stable alignment. Remove chips and debris between steps to avoid damage to the STI thread and insert.

Ứng dụng

  • Support sửa ren workflows with Ren cấy V-COIL, depending on the tool type stated in the product name.
  • Use in maintenance, mechanical engineering, and fabrication workflows to restore ren trong function.

Lưu ý Keep the tool or gauge clean and stored protected from impact and corrosion.

Lợi ích

  • Supports restoration of ren trong with wire insert systems
  • Helps improve assembly reliability after thread damage
  • Suitable for maintenance, repair, and overhaul workflows
  • Supports process consistency when combined with correct preparation steps
Hạn chế
  • Requires correct system selection and preparation steps for reliable results
  • Not intended for high performance production without process validation

Các bước thực hiện

  1. Confirm the insert system sequence for drilling, tapping, installation, and tang removal where applicable.
  2. Prepare the bore and clean the work area to reduce contamination risk.
  3. Use the tool according to its function within the repair sequence, with stable alignment.
  4. Remove debris between steps so the insert and thread surfaces remain clean.
  5. Verify the repaired thread function using an appropriate inspection method.
  6. Store the tool cleaned and protected.

Phạm vi cung cấp

The provided file does not specify scope of supply for this product.

Đặc tính kỹ thuật

  • Product class: sửa ren
  • Tool type: sửa ren tool

Vui lòng dùng biểu mẫu liên hệ.

Sản phẩm cùng thư mục
เครื่องมือใส่สลักเกลียว V-COIL notch VÖLKEL สำหรับเกลียวคอยล์แบบไม่มีขา, M 3 x 0.5 – M 12 x 1.75
091xx
เครื่องมือใส่สลักเกลียว V-COIL notch VÖLKEL สำหรับเกลียวคอยล์แบบไม่มีขา, M 3 x 0.5 – M 12 x 1.75
€47.15
-
€62.85
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UN 8 เกลียวต่อนิ้ว, UN 1.1/8 x 8 – UN 2" x 8
0874x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UN 8 เกลียวต่อนิ้ว, UN 1.1/8 x 8 – UN 2" x 8
€33.03
-
€87.34
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UNC, UNC 1/4 – UNC 1.1/2
0805x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UNC, UNC 1/4 – UNC 1.1/2
€10.50
-
€38.16
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียวเมตริก, M 2.5 x 0.45 – M 52 x 5.0
0803x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียวเมตริก, M 2.5 x 0.45 – M 52 x 5.0
€10.12
-
€74.77
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียวท่อ G BSP, G 1/8 – G 1
0808x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียวท่อ G BSP, G 1/8 – G 1
€16.53
-
€38.16
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL ด้ามจับหกเหลี่ยม 1/4 นิ้ว สำหรับใช้กับเครื่องจักร, M 3 x 0.5 – M 12 x 1.75
0807x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL ด้ามจับหกเหลี่ยม 1/4 นิ้ว สำหรับใช้กับเครื่องจักร, M 3 x 0.5 – M 12 x 1.75
€14.12
-
€21.21
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UNF, UNF 1.1/8 – UNF 1.1/2
0806x
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL เกลียว UNF, UNF 1.1/8 – UNF 1.1/2
€32.89
-
€38.16
★ 0 • ขายแล้ว 0
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL ตามหมายเลข, No. 2 – No. 23
080xx
เครื่องมือใส่สลักเกลียว V-COIL VÖLKEL ตามหมายเลข, No. 2 – No. 23
€10.33
-
€24.62
★ 0 • ขายแล้ว 0
ชุดซ่อมเกลียว, UNF 1.1/8 - 1,5D
04136
ชุดซ่อมเกลียว, UNF 1.1/8 - 1,5D
€518.47
★ 0 • ขายแล้ว 0
ชุดซ่อมเกลียว, UNC 1.1/4 - 1,5D
04118
ชุดซ่อมเกลียว, UNC 1.1/4 - 1,5D
€565.65
★ 0 • ขายแล้ว 0

รีวิวสินค้า

จากการรีวิว 0 รายการ
0.0
ภาพรวม
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

เป็นคนแรกที่รีวิว “V-COIL Extracting Tool số 3”

🎁 เขียนรีวิวเพื่อรับ 20 คะแนนสะสม — มีรูปภาพ +10, มีวิดีโอ +15 คะแนน.
สะสมคะแนนเพื่อแลกของขวัญพิเศษจาก Minh Khang Vinatools เข้าสู่ระบบ
กรุณา เข้าสู่ระบบ เพื่อส่งรีวิว
เพิ่งดูล่าสุด
ยังไม่มีรายการ