Hotline: 098 484 7029 Email: [email protected]
V-coil 삽입 공구

V-COIL Extracting Tool số 3

★ 0.0 (0 리뷰)
판매됨: 0
조회수: 0
수입국: 독일
원산지: 독일

V-COIL Extracting Tool số 3 VÖLKEL, mã 07053, phù hợp cho sửa ren và lắp ren cấy.

SKU: 07053
€26.41
재고 상태: 예약 주문 4-8주
참고 가격
설명

V-COIL Extracting Tool số 3

Use this sửa ren item when you need to restore ren trong with a wire insert system. The product name indicates the relevant system reference for selection.

Use controlled torque and stable alignment. Remove chips and debris between steps to avoid damage to the STI thread and insert.

Ứng dụng

  • Support sửa ren workflows with Ren cấy V-COIL, depending on the tool type stated in the product name.
  • Use in maintenance, mechanical engineering, and fabrication workflows to restore ren trong function.

Lưu ý Keep the tool or gauge clean and stored protected from impact and corrosion.

Lợi ích

  • Supports restoration of ren trong with wire insert systems
  • Helps improve assembly reliability after thread damage
  • Suitable for maintenance, repair, and overhaul workflows
  • Supports process consistency when combined with correct preparation steps
Hạn chế
  • Requires correct system selection and preparation steps for reliable results
  • Not intended for high performance production without process validation

Các bước thực hiện

  1. Confirm the insert system sequence for drilling, tapping, installation, and tang removal where applicable.
  2. Prepare the bore and clean the work area to reduce contamination risk.
  3. Use the tool according to its function within the repair sequence, with stable alignment.
  4. Remove debris between steps so the insert and thread surfaces remain clean.
  5. Verify the repaired thread function using an appropriate inspection method.
  6. Store the tool cleaned and protected.

Phạm vi cung cấp

The provided file does not specify scope of supply for this product.

Đặc tính kỹ thuật

  • Product class: sửa ren
  • Tool type: sửa ren tool

Vui lòng dùng biểu mẫu liên hệ.

제품 리뷰

0개의 리뷰 기준
0.0
전체
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

"V-COIL Extracting Tool số 3"의 첫 리뷰를 작성해 보세요

🎁 리뷰 작성 시 20 적립금 지급 — 사진 +10, 동영상 +15.
Minh Khang Vinatools의 독특한 선물로 교환할 수 있는 리워드 포인트를 적립하세요. 로그인
다음을 로그인 리뷰를 제출하세요.
최근 본 상품
아직 항목 없음