Trang chủ Bàn ren lục giác DIN 382 HSS - M 18 x 1.25

Bàn ren lục giác DIN 382 HSS - M 18 x 1.25

Name: Bàn ren lục giác DIN 382 HSS - M 18 x 1.25
Brand: VOLKEL
SKU: 26171
Price: 1701000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Bàn ren lục giác DIN 382 HSS - M 18 x 1.25 VÖLKEL, mã 26171, phù hợp cho gia công ren ngoài.

SKU: 26171

1.701.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Bàn ren lục giác DIN 382 HSS - M 18 x 1.25

You use this tool in threading related work where correct alignment and a matching standard are required in the designation M 18 x 1.25.

Selection and handling depend on the interface and execution stated in the product name and on the workpiece material used in your process.

Ứng dụng

Support common threading workflows in fabrication and maintenance settings depending on execution
Use with matching holders and interfaces stated in the product name
Clamp the die in a matching Bàn ren ngoài (tạo ren ngoài) holder or Tay quay bàn ren and keep the setup square to the workpiece axis
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition

Lưu ý Select the variant that matches the thread standard, hand direction, and tolerance requirements stated in your drawing.

Lợi ích

Supports secure handling in threading related processes depending on execution
Helps you keep alignment and consistent tool engagement
Simple setup for workshop and maintenance operations
Design supports repeatable results when used with a matching interface

Hạn chế

Limited performance in very hard, abrasive, or heat treated materials depending on tool grade and coating
Not suitable for high volume production where cycle time and tool life must be maximized

Các bước thực hiện

Confirm the product execution stated in the product name
Prepare the workplace and ensure the workpiece is secured
Mount the tool in a suitable holder depending on execution
Align the tool carefully before you start
Use a suitable Chất bôi trơn cắt gọt ren if your process requires it
Carry out the operation with steady control
Clean the tool and protect it for storage

Phạm vi cung cấp

1 chiếc: Tool

Đặc tính kỹ thuật

Tool type: Tool
Standard: DIN 382 HSS - M 18
Material: HSS
Thread system: Metric
Tolerance: GO and NO GO limits per ISO 1502
Thread designation: M 18 x 1.25

Câu hỏi thường gặp (FAQ)

How do you confirm compatibility before use? Match the interface and execution stated in the product name to your tool and holder setup. If any parameter is unclear, verify it in your documentation before you start. What is a common setup check? Clean contact surfaces and ensure the tool is seated correctly. Stable clamping reduces alignment errors and uneven load. How do you maintain the product? Remove debris, wipe clean, and apply corrosion protection if needed. Storage conditions in workshops can strongly influence service life. When should you change the tool or accessory? Change it when clamping becomes unreliable, guidance is no longer precise, or visible damage appears. Continued use can compromise process stability. Where do you find selection information? Use the product name to match your drawing and then consult the relevant catalog for tables and execution notes. Where can you find additional technical information for this tool type? Use the technical information document for background on geometry terms, selection logic, and handling notes. Technical information Bàn ren lục giác as PDF What is a sensible inspection method after cutting? Use the inspection method defined in your quality plan and check fit and surface. If you see tearing or tight fit, review alignment, lubrication, and tool condition. Where can you find the full VÖLKEL catalog for selection support? Use the catalog for the complete range, execution variants, and reference tables. VD 23 catalog as PDF

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric-fine ISO-thread
Tiêu chuẩn	DIN 382
Vật liệu	HSS
Tolerance	6g
Kích thước	M 18 x 1.25
Width across flat	41 mm
EAN	4022835261711
Mã hàng	26171
Chuẩn ren	DIN 13
Rec. Bolt diameter	17.86 mm