Mũi taro ren tay tạo ren trong set of 3 chiếc DIN 352 HSS-G - M 56 x 5.5

• Create ren trong in pre drilled holes in common engineering materials.
• Support thread restoration work where an existing thread needs to be re tapped after damage or contamination.
• Use in general mechanical engineering, plant maintenance, and metal fabrication for threaded connections.
• Apply cutting fluid suitable for the workpiece material to reduce friction and improve surface quality.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Holder guidance: use a Tay quay taro that keeps the tool centered and aligned.

Lưu ý Match the thread system and nominal designation in the product name to the part you need to produce or inspect, and work to the relevant standard.

• Supports workshop level repair tasks without complex equipment.
• Helps you produce a defined thread profile for repeatable assembly.
• Enables controlled engagement and torque transmission in threaded joints.
• Fits common shop workflows for threading operations.

• Cutting performance is limited in very hard or abrasive materials compared with dedicated carbide solutions.
• Not intended for high performance production without controlled machine parameters and consistent lubrication.

1. Confirm that the thread designation in the product name matches the hole you need to thread.
2. Prepare the hole and entry chamfer according to the relevant thread standard and remove burrs.
3. Apply a cutting fluid suitable for the workpiece material.
4. Align the tool straight to the hole axis and start with controlled pressure.
5. Continue with steady torque and withdraw periodically to clear chips from the flutes.
6. For machine use, set a suitable tapping cycle and keep the tool aligned through the full stroke.
7. After reaching depth, reverse smoothly, remove the tool, and clean the thread and tool.

• 1 set: Mũi taro ren tay (tạo ren trong) set of 3 chiếc DIN 352 HSS-G - M 56 x 5.5

• Type: Mũi taro ren tay (tạo ren trong)
• Standard: DIN 352
• Material: HSS-G
• Manufacturing type: ground
• Thread system: Metric
• Tolerance class: ISO 2 (6H)

Which holder or drive method is appropriate?
For Mũi taro ren tay (tạo ren trong) you typically use a Tay quay taro for guided manual torque. For machine taps you use a machine holder such as a tapping chuck or collet system that keeps the tool aligned.

How do you care for the tool after use?
Remove chips and coolant residue, then dry and lightly protect against corrosion if needed. Store the tool so cutting edges do not contact other tools.

How do you choose the correct variant?
Match the thread system and nominal size shown in the product name to the thread you need. Also consider the workpiece material and whether you need a hand guided or machine driven process.

What preparation is required before tapping?
Prepare the hole according to the thread standard for the nominal designation, and remove burrs at the entry. Clean the surface so chips and debris do not enter the flutes.

How do you reduce wear and improve thread surface quality?
Use a cutting fluid suited to the workpiece material and keep the tool aligned during entry. Clean chips from the cutting area and stop if torque rises unexpectedly.

How do you store the product to maintain accuracy and edge condition?
Store it dry and protected from impact, and keep protective caps or packaging in place if supplied. Avoid contact between functional surfaces and other tools.

Where can you find additional technical guidance for this tool family?
Use the technical information document for background, selection guidance, and process notes. Tài liệu kỹ thuật

What is a practical sign that you should stop and recheck the setup?
If entry feels uneven, the tool drifts off axis, or resistance rises abruptly, stop and check alignment and lubrication. Continuing can damage the thread and the tool.

Where can you find further selection tables and technical guidance in the catalog?
Use the catalog for additional information and selection support. Catalog VD 23 (PDF)