Trang chủ Mũi taro ren Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5

Mũi taro ren

Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5

Name: Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5
Brand: VOLKEL
SKU: 67226
Price: 253000.0 VND
Availability: OutOfStock

★ 0.0 (0 đánh giá)

Đã bán: 0

Nhập khẩu từ: Đức

Xuất xứ: Đức

Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5 VÖLKEL, mã 67226, phù hợp cho gia công ren trong.

SKU: 67226

253.000 đ

Giá đã bao gồm VAT

Vui lòng liên hệ để được báo giá và tình trạng hàng.

Mô tả

Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5

Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5 supports controlled cắt ren when you select it by thread system and apply it in a stable, guided setup. It fits typical shop workflows in machine building, service, and metal fabrication.

M denotes an ISO metric thread, common in mechanical engineering where metric drawings and tolerances are used. HSS-G means ground high speed thép, which is commonly used when you need stable cutting behavior and clean thread flanks.

Ứng dụng

Threading Tool use in repair and small batch work, including service workshops and mechanical engineering.
Thread production on prepared holes or blanks where alignment is controlled by a holder, guide, or machine spindle.
Process: manual driving or assisted driving depending on your holder and machine setup
Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
Use suitable lubrication and remove chips regularly so cutting edges do not pack up.
Thread system context: match the tool to the M specification stated on the part or drawing.

Lưu ý Clean threads and tools before use, apply suitable lubrication for cutting operations, and stop if resistance rises sharply.

Lợi ích

Direct selection by thread designation such as M when stated reduces setup mistakes.
Suitable for workshop processes where alignment and controlled engagement are practical priorities.
Supports consistent thread quality when you use steady feed and lubrication.
Works well for maintenance tasks where parts must be reworked to the drawing requirement.

Hạn chế

Not suitable for materials or hardness outside the typical range for the named tool material and execution.
Not intended for high performance production without a validated process and rigid machine conditions.

Các bước thực hiện

Prepare the hole or existing thread so entry is clean and burr free.
Select a suitable holder and ensure the tool is aligned square to the thread axis.
Apply suitable cutting Chất bôi trơn cắt gọt ren and start the cut with steady rotation.
Maintain even feed without side force so the tool follows the axis.
Reverse briefly to clear chips from the flutes, then continue with controlled engagement.
Stop when required depth is reached, then back the tool out completely.
Clean the thread and tool, then protect the tool from corrosion for storage.

Phạm vi cung cấp

1 chiếc Mũi khoan taro kết hợp, chuôi lục giác 1/4 inch 30° Spiral Flute HSS-G - M 3 x 0.5

Đặc tính kỹ thuật

Product type: Threading Tool
Thread designation: M
Tool material or execution: HSS-G

Câu hỏi thường gặp (FAQ)

How do you decide between a Mũi taro ren tay (tạo ren trong) and a Mũi taro máy for this thread? You choose by the driving method and the stability of the setup. Mũi taro ren tay (tạo ren trong) support controlled manual work, while machine taps support guided or powered driving with stable alignment. What do you check before you start cutting the thread? Confirm the thread designation, the hole preparation, and the workpiece material. Keep alignment square to the axis and plan lubrication and chip evacuation. How do you reduce the risk of a tapered or oversize thread? Maintain alignment, avoid side load, and use steady feed. Clean chips from the cutting geometry and verify the first part against the specification. Where do you find the matching catalog for additional variants and reference data? Use the catalog for additional information and product family context: VD 23 catalog as PDF How do you choose the correct drill preparation without guessing values? Use a drill size chart that matches the thread system and the tool type. For inch based threads, confirm that the notation is interpreted correctly before drilling. When should you replace the tool instead of forcing it? Replace it if cutting torque rises abruptly, if the tool rubs without cutting, or if the thread surface becomes torn. Forcing a worn tool can damage the workpiece and the tool.

Do you need help selecting or using the product?
Use the biểu mẫu liên hệ.

Thuyết minh kỹ thuật

Loại ren	metric ISO-thread
Tiêu chuẩn	Works Standard
Vật liệu	HSS-G
Tolerance	ISO2 (6H)
Kích thước	M 3 x 0.5
Overall length (L1)	36 mm
Core hole diameter (D1)	2.5 mm
Drive connector	Sechskant 1/4" Zoll
Width across flat (SW1)	Zoll
EAN	4022835672265
Mã hàng	67226
Type of flute	30° Spiral Flute
Phạm vi ứng dụng	for through holes
Chuẩn ren	DIN 13