Hotline: 098 484 7029 Email: [email protected]
折舌工具

断尾工具 (Drive connector 1/4") 8号

★ 0.0 (0 评价)
已售: 0
浏览量: 0
进口自: 德国
产地: 德国

Dụng cụ bẻ chân ren cấy (Drive connector 1/4") số 8 VÖLKEL, mã 07093, phù hợp cho sửa ren và lắp ren cấy.

SKU: 07093
CN¥31.82
库存状态: 预订 4-8 周
参考价格
描述

Dụng cụ bẻ chân ren cấy (Drive connector 1/4") số 8

With Dụng cụ bẻ chân ren cấy (Drive connector 1/4") số 8 you create a thread interface that must assemble without force. Preparation of the hole or blank and steady alignment are the practical checkpoints for repeatable threads.

Selection is mainly driven by the thread designation and by keeping the process aligned and stable.

Ứng dụng

  • Threading Tool use in repair and small batch work, including service workshops and mechanical engineering.
  • Thread production on prepared holes or blanks where alignment is controlled by a holder, guide, or machine spindle.
  • Process: manual driving or assisted driving depending on your holder and machine setup
  • Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
  • Use suitable lubrication and remove chips regularly so cutting edges do not pack up.

Lưu ý Clean threads and tools before use, apply suitable lubrication for cutting operations, and stop if resistance rises sharply.

Lợi ích

  • Direct selection by thread designation reduces setup mistakes.
  • Suitable for workshop processes where alignment and controlled engagement are practical priorities.
  • Supports consistent thread quality when you use steady feed and lubrication.
  • Works well for maintenance tasks where parts must be reworked to the drawing requirement.
Hạn chế
  • Not suitable for materials or hardness outside the typical range for the named tool material and execution.
  • Not intended for high performance production without a validated process and rigid machine conditions.

Các bước thực hiện

  1. Prepare the hole or existing thread so entry is clean and burr free.
  2. Select a suitable holder and ensure the tool is aligned square to the thread axis.
  3. Apply suitable cutting Chất bôi trơn cắt gọt ren and start the cut with steady rotation.
  4. Maintain even feed without side force so the tool follows the axis.
  5. Reverse briefly to clear chips from the flutes, then continue with controlled engagement.
  6. Stop when required depth is reached, then back the tool out completely.
  7. Clean the thread and tool, then protect the tool from corrosion for storage.

Phạm vi cung cấp

  • 1 chiếc Dụng cụ bẻ chân ren cấy (Drive connector 1/4") số 8

Đặc tính kỹ thuật

  • Product type: Threading Tool

Vui lòng dùng biểu mẫu liên hệ.

产品评价

基于 0 条评价
0.0
概览
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

成为第一个评价“断尾工具 (Drive connector 1/4") 8号”的人

🎁 撰写评价可获得20奖励积分 — 有图片 +10, 有视频 +15积分.
累积奖励积分,兑换Minh Khang Vinatools独特礼品。 登录
请 登录 提交评价。
最近浏览
暂无项目