Hotline: 098 484 7029 Email: [email protected]
Alat pematah punca tap

Dụng cụ bẻ chân ren cấy số 15

★ 0.0 (0 ulasan)
Terjual: 0
Tontonan: 0
Diimport dari: Jerman
Asal: Jerman

Dụng cụ bẻ chân ren cấy số 15 VÖLKEL, mã 07015, phù hợp cho sửa ren và lắp ren cấy.

SKU: 07015
€5.79
Status stok: Tempahan balik 4-8 minggu
Harga indikatif
Penerangan

Dụng cụ bẻ chân ren cấy số 15

You use this Dụng cụ bẻ chân ren cấy to remove the tang of a Ren cấy V-COIL after installation. This supports a clear bore and prevents interference with fasteners or mating parts.

For predictable results, ensure the insert is installed to depth and the bore is free of debris. Align the tool straight and apply a controlled drive action depending on execution.

Ứng dụng

  • Remove insert tangs after installation so the bore is clear for assembly and functional use.
  • Use in repair and maintenance operations where Ren cấy V-COIL are installed in blind or lỗ thông.
  • Select the tool by the insert size reference stated in the product name.
  • Ensure the insert is seated correctly before tang removal.
  • Remove loose debris after tang removal before final assembly.

Lưu ý Keep the tool or gauge clean and stored protected from impact and corrosion.

Lợi ích

  • Supports controlled tang removal after insert installation
  • Helps keep the bore clear for assembly and functional use
  • Simple handling tool for repair and maintenance workflows
  • Reduces the risk of improvised tang removal methods
Hạn chế
  • Requires correct alignment to avoid contact with insert coils
  • Not intended for high volume automated work without a dedicated setup

Các bước thực hiện

  1. Verify that the Ren cấy V-COIL is installed to the required depth.
  2. Remove loose debris from the bore so the tool can be guided straight.
  3. Insert the Dụng cụ bẻ chân ren cấy centrally through the insert until it contacts the tang.
  4. Apply a controlled drive action according to your tool execution to separate the tang.
  5. Remove the tool and confirm that the tang is fully removed from the insert.
  6. Remove loose debris and check that the bore is clear before assembly.
  7. Store the tool clean and protected for the next use.

Phạm vi cung cấp

The provided file does not specify scope of supply for this product.

Đặc tính kỹ thuật

  • Product class: sửa ren
  • Tool type: Dụng cụ bẻ chân ren cấy

Vui lòng dùng biểu mẫu liên hệ.

Sản phẩm cùng loại 11

Ulasan produk

Berdasarkan 0 ulasan
0.0
Keseluruhan
5★ 0
4★ 0
3★ 0
2★ 0
1★ 0

Jadilah yang pertama menilai “Dụng cụ bẻ chân ren cấy số 15”

🎁 Tulis ulasan untuk dapatkan 20 mata ganjaran — foto +10, video +15.
Kumpul mata ganjaran untuk menebus hadiah eksklusif daripada Minh Khang Vinatools. Log masuk
Sila log masuk untuk hantar ulasan.
Dilihat baru-baru ini
Tiada item lagi