Mũi taro ren tay (tạo ren trong) set of 3 chiếc DIN 352 HSS-G - BSW 5/32 x 32

• Create ren trong in pre drilled holes in common engineering materials.
• Support thread restoration work where an existing thread needs to be re tapped after damage or contamination.
• Use in general mechanical engineering, plant maintenance, and metal fabrication for threaded connections.
• Apply cutting fluid suitable for the workpiece material to reduce friction and improve surface quality.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Holder guidance: use a Tay quay taro that keeps the tool centered and aligned.

Lưu ý Match the thread system and nominal designation in the product name to the part you need to produce or inspect, and work to the relevant standard.

• Helps you produce a defined thread profile for repeatable assembly.
• Enables controlled engagement and torque transmission in threaded joints.
• Supports workshop level repair tasks without complex equipment.
• Fits common shop workflows for threading operations.

• Cutting performance is limited in very hard or abrasive materials compared with dedicated carbide solutions.
• Not intended for high performance production without controlled machine parameters and consistent lubrication.

1. Confirm that the thread designation in the product name matches the hole you need to thread.
2. Prepare the hole and entry chamfer according to the relevant thread standard and remove burrs.
3. Apply a cutting fluid suitable for the workpiece material.
4. Align the tool straight to the hole axis and start with controlled pressure.
5. Continue with steady torque and withdraw periodically to clear chips from the flutes.
6. For machine use, set a suitable tapping cycle and keep the tool aligned through the full stroke.
7. After reaching depth, reverse smoothly, remove the tool, and clean the thread and tool.

• 1 set: Mũi taro ren tay (tạo ren trong) set of 3 chiếc DIN 352 HSS-G - BSW 5/32 x 32

• Type: Mũi taro ren tay (tạo ren trong)
• Standard: DIN 352
• Material: HSS-G
• Manufacturing type: ground