Bàn ren ngoài (tạo ren ngoài) DIN 223 (DIN EN 22568) HSS - BSW 1" x 8

• Bàn ren ngoài (tạo ren ngoài) use in repair and small batch work, including service workshops and mechanical engineering.
• Thread production on prepared holes or blanks where alignment is controlled by a holder, guide, or machine spindle.
• Process: manual driving or assisted driving depending on your holder and machine setup
• Use: cắt ren, taro lại ren, and làm sạch ren depending on condition
• Use suitable lubrication and remove chips regularly so cutting edges do not pack up.
• Thread system context: match the tool to the BSW specification stated on the part or drawing.

Lưu ý Clean threads and tools before use, apply suitable lubrication for cutting operations, and stop if resistance rises sharply.

• Direct selection by thread designation such as BSW when stated reduces setup mistakes.
• Suitable for workshop processes where alignment and controlled engagement are practical priorities.
• Supports consistent thread quality when you use steady feed and lubrication.
• Works well for maintenance tasks where parts must be reworked to the drawing requirement.

• Not suitable for materials or hardness outside the typical range for the named tool material and execution.
• Not intended for high performance production without a validated process and rigid machine conditions.

1. Inspect the blank and remove burrs so the die can start square to the axis.
2. Mount the die in a suitable die holder and secure it so it cannot tilt under load.
3. Align the holder to the workpiece axis and apply suitable cutting Chất bôi trơn cắt gọt ren.
4. Start the thread with steady rotation and maintain axial alignment without side force.
5. Reverse briefly to clear chips from the cutting edges, then continue with steady feed.
6. Continue until required engagement is reached, then back the die off fully.
7. Clean the thread and the die, then protect the tool from corrosion before storage.

• 1 chiếc Bàn ren ngoài (tạo ren ngoài) DIN 223 (DIN EN 22568) HSS - BSW 1" x 8

• Product type: Bàn ren ngoài (tạo ren ngoài)
• Standard: DIN 223 / DIN EN 22568
• Thread designation: BSW
• Tool material or execution: HSS